منابع مشابه
A Review of the Rheology of Filled Viscoelastic Systems
We are concerned here with the effect of added filler particles on the linear and non-linear rheological properties of viscoelastic systems. Whilst the addition of spherical or near-spherical filler particles will almost always increase the level of both the linear and the non-linear viscometric properties (so leading to increases in pressure drops, etc.), we usually find a decrease in the leve...
متن کاملCHARACTERIZATION OF SHORT E-GLASS FIBER REINFORCEDGRAPHITE AND BRONZE FILLED EPOXY MATRIX COMPOSITES
The mechanical characterization of short E- glass fiber reinforced, graphite and sintered bronze filled epoxy composite was carried out in this study. The aim of the present study was to develop tribological engineering material. In this study the flexural strength, theoretical and experimental density, Hardness and Impact strength of composites was investigated experimentally. The results show...
متن کاملRheology of Ceramic-powder-filled Polymer Melts
Ceramic powder (zirconia) was mixed with binder consisting polypropylene, paraffin and stearic acid in elastic extruder. Steady and oscillatory shear flow properties of these materials in the molten state were measured on a cone-plate rheometer; parallel superposed steady and oscillatory shear flow experiments were also carried out. Moreover, flow properties at high shear rates were measured on...
متن کاملModeling pulp fiber suspension rheology
Rheological properties of pulp suspensions play a very important role in the industry, mainly due to the consumption of energy for transporting pulp among the different parts of the paper mill. In this work, we determined the rheology of longand short-fiber bleached kraft pulp suspensions by using a new rotational viscometer especially designed for their analysis. The experimental rheograms wer...
متن کاملExperimental clues of soft glassy rheology in strained filled elastomers
Tensile stress-relaxation measurements have been performed on a series of cross-linked filled elastomers. The fillers are chosen in order to investigate the effect of the filler-filler and the filler-matrix interactions on the time dependence of the tensile relaxation modulus after UP and DOWN jumps. For the carbon black filled sample (strong filler-elastomer interaction) decreases as log(t) wh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Kobunshi
سال: 1986
ISSN: 0454-1138,2185-9825
DOI: 10.1295/kobunshi.35.1090