Rheological behaviour of low-heat Portland cement paste with MgO-based expansive agent and shrinkage reducing admixture

Drying Shrinkage Mechanisms in Portland Cement Paste

The shrinkage mechanisms of portland cement paste were investigated from shrinkage, weight loss, and pore structure measurements using nitrogen sorption and mercury intrusion porosimetry (MIP). Thin samples (2.3 mm) of well-hydrated (165 d) pastes of 0.4 and 0.6 water-to-cement (W/C) ratios were dried directly from saturated surface dry state to 75%, SO%, 11%, and 0% relative humidity (rh). Fro...

Modeling of Hydration Kinetics and Shrinkage of Portland Cement Paste

MODELING OF HYDRATION KINETICS AND SHRINKAGE OF PORTLAND CEMENT PASTE

Decalcification shrinkage of cement paste

Decalcification of cement paste in concrete is associated with several modes of chemical degradation including leaching, carbonation and sulfate attack. The primary aim of the current study was to investigate the effects of decalcification under saturated conditions on the dimensional stability of cement paste. Thin (0.8 mm) specimens of tricalcium silicate (C3S) paste, white portland cement (W...

Structure and Physical Properties of Hardened Portland Cement Paste

Effect of Heat Treatment on the Pore Structure and Drying Shrinkage Behavior of Hydrated Cement Paste

The effect of a short heat treatment on hydrated cement paste has been investigated by measuring the weight and length changes of specimens as they undergo various combinations of heating, drying, and resaturation. Heating a cement paste to 60°C coarsens the capillary pore system, decreases the volume of mesopores, and increases the degree of polymerization of the silicates. In addition, the sa...