Rheological behavior of Al-Cu alloys during solidification constitutive modeling, experimental identification, and numerical study
نویسندگان
چکیده
منابع مشابه
the study of micro-segregation in al-cu alloys using thermal analysis and numerical modeling
the micro-segregation in binary al-cu alloys containing 2.2, 3.7, and 4.8 wt.% copper was investigated by differential thermal analysis (dta) and numerical modeling. for this purpose, the alloys were melted using a dta furnace with the capability of quenching samples during solidification. the melted samples were cooled at 0.008 and 0.083 k/s and subsequently quenched from predetermined tempera...
متن کاملRheological behavior of a commercial AA5182 aluminum alloy during solidification
During casting of aluminum alloys, the partially solidified material is submitted to thermally induced strains that can lead to severe casting defects, such as hot tearing. In this work, carried out in the frame of the European project VIR[CAST], the rheological behavior of a partially solidified AA5182 aluminum alloy has been investigated in order to provide constitutive equations to predict h...
متن کاملEvaluation of Heterogeneous Densification, Anisotropic Shrinkage and Rheological Behavior of Ceramic Materials during Liquid Phase Sintering by Numerical-Experimental Procedure
The effective shear and bulk viscosity, as well as dynamic viscosity, describe the rheological properties of the ceramic body during the liquid phase sintering process. The rheological parameters depend on the physical and thermo-mechanical characteristics of the material such as relative density, temperature, grain size, diffusion coefficient, and activation energy. Thermal behavior of the cer...
متن کاملThe Refining Mechanism of Super Gravity on the Solidification Structure of Al-Cu Alloys
There is far less study of the refining effect of super gravity fields on solidification structures of metals than of the effects of electrical currents, magnetic and ultrasonic fields. Moreover, the refining mechanisms of super gravity are far from clear. This study applied a super gravity field to Al-Cu alloys to investigate its effect on refining their structures and the mechanism of interac...
متن کاملKinetic Phase Diagrams of Ternary Al-Cu-Li System during Rapid Solidification: A Phase-Field Study
Kinetic phase diagrams in technical alloys at different solidification velocities during rapid solidification are of great importance for guiding the novel alloy preparation, but are usually absent due to extreme difficulty in performing experimental measurements. In this paper, a phase-field model with finite interface dissipation was employed to construct kinetic phase diagrams in the ternary...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2005
ISSN: 1073-5623,1543-1940
DOI: 10.1007/s11661-005-0244-7