RF/DC Magnetron Sputtering Deposition of Thin Layers for Solar Cell Fabrication
نویسندگان
چکیده
منابع مشابه
Radio Frequency Magnetron Sputtering Deposition of TiO2 Thin Films and Their Perovskite Solar Cell Applications
In this work, we report a physical deposition based, compact (cp) layer synthesis for planar heterojunction perovskite solar cells. Typical solution-based synthesis of cp layer for perovskite solar cells involves low-quality of thin films, high-temperature annealing, non-flexible devices, limitation of large-scale production and that the effects of the cp layer on carrier transport have not bee...
متن کاملDEPOSITION OF THIN TiO2 FILMS BY DC MAGNETRON SPUTTERING METHOD
Sputter deposition process is another old technique being used in modern semiconductor industries. Sputtering is a process that can deposit TiO2 material on wafer/glass substrates. In this process target is connected to negative high voltage. Further argon gas is introduced into the chamber and is ionized to a positive charge. The positively charged argon atoms are attracted and strike the nega...
متن کاملFabrication of InGaN thin-film transistors using pulsed sputtering deposition
We report the first demonstration of operational InGaN-based thin-film transistors (TFTs) on glass substrates. The key to our success was coating the glass substrate with a thin amorphous layer of HfO2, which enabled a highly c-axis-oriented growth of InGaN films using pulsed sputtering deposition. The electrical characteristics of the thin films were controlled easily by varying their In conte...
متن کاملREACTIVE PULSE MAGNETRON SPUTTERING FOR THE DEPOSITION OF HIGH QUALITY AlN THIN FILMS
Aluminium nitride is a promising coating material for many applications, due to its good physical and mechanical properties. Hard transparent Aluminium nitride thin films have been deposited by bipolar reactive pulsed magnetron sputtering (PMS). With its inherent advantages of energetic particle bombardment of the growing film and minimal arcing tendency even in dielectric layer deposition proc...
متن کاملOptimization of DC reactive magnetron sputtering deposition process for efficient YSZ electrolyte thin film SOFC
Yttria-stabilized zirconia (YSZ, ZrO2:Y2O3) thin films were deposited by reactive DC magnetron sputtering with a high deposition rate from a metallic target of Zr/Y in an argon/oxygen atmosphere. Plasma parameters and composition analysis of the gas phase reveal that the sputtering process in the “compound” mode is reached for a 2.5 sccm oxygen flow rate. Deposition onto silicon in “metal” mode...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2020
ISSN: 2079-6412
DOI: 10.3390/coatings10080791