Review of Carbon Fiber Reinforced Composite Materials

Carbon Nanotube Reinforced Alumina Composite Materials

Machinability of glass fiber reinforced plastic (GFRP) composite materials

This paper deals with the study of machinability of GFRP composite tubes of different fiber orientation angle vary from 30 to 90. Machining studies were carried out on an all geared lathe using three different cutting tools: namely Carbide (K-20), Cubic Boron Nitride (CBN) and Poly-Crystalline Diamond (PCD). Experiments were conducted based on the established Taguchi’s Design of Experiments (DO...

Energy Systems and Crushing Behavior of Fiber Reinforced Composite Materials

Effect of geometry on crushing behavior, energy absorption and failure mode of woven roving jute fiber/epoxy laminated composite tubes were experimentally studied. Investigations were carried out on three different geometrical types of composite tubes (circular, square and radial corrugated) subjected to axial compressive loading. It was observed in axial crushing study that the load bearing ca...

Use of carbon-fiber-reinforced composite implants in orthopedic surgery.

Carbon-fiber-reinforced polyetheretherketone implants offer several benefits over traditional metal implants. Their radiolucent property permits improved, artifact-free radiographic imaging. Their lower modulus of elasticity better matches that of bone. Their fatigue strength is greater than most metal implants. This article reviews the use of these implants in orthopedic surgery, including tre...

Evaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite

Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...