Reuter Centrifugal Air Sampler: Measurement of Effective Airflow Rate and Collection Efficiency
نویسندگان
چکیده
منابع مشابه
Comparison of bacterial recovery by Reuter centrifugal air sampler and slit-to-agar sampler.
Bacterial recovery by a portable Reuter centrifugal air sampler and a standard Mattson-Garvin slit-to-agar air sampler was compared in a series of experiments. Microbial air quality was monitored in seven typical laboratory locations. Tests showed that the Reuter centrifugal air sampler yielded significantly higher recoveries than did the slit-to-agar unit.
متن کاملDevelopment of an Ultrasonic Airflow Measurement Device for Ducted Air
In this study, an in-duct ultrasonic airflow measurement device has been designed, developed and tested. The airflow measurement results for a small range of airflow velocities and temperatures show that the accuracy was better than 3.5% root mean square (RMS) when it was tested within a round or square duct compared to the in-line Venturi tube airflow meter used for reference. This proof of co...
متن کاملبررسی عملکرد الکتروسیکلون در جمع آوری ذرات هوابرد زیر یک میکرومتر سیلیس
Background and Objectives: Cyclone is one of the most utilized dust collectors for airborne particles control. It separates particles from airflow by centrifugal force. However, it is not effective in collecting very fine particles smaller than 10 μm in diameter. The aim of this study was to assess the performance of charging particles on cyclone efficiency in collecting particles smaller than ...
متن کاملSampler collection gadget for epilithic diatoms.
This work present a new gadget for sampling epilithic diatoms from both lentic and lotic enviroments. The sampler consists of a polystyrene cylinder, left to float on the surface of the water, to which stone substrates are attached. This epilithic diatom sampler (EDS) can be used to detect spatial and temporal richness and density variation in the study of the diatom community, as well as in wa...
متن کاملCalculation of airborne cleanliness and air supply rate for non-unidirectional airflow cleanrooms
When designing a cleanroom to achieve a required airborne cleanliness standard or grade, such as specified in ISO 1464411 or the European Union Guidelines to Good Manufacturing Practice (EU GGMP)2, designers have difficulties deciding how much filtered air should be supplied to the cleanroom to achieve the correct airborne cleanliness requirement. Currently, this decision is based on experience...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied and Environmental Microbiology
سال: 1983
ISSN: 0099-2240,1098-5336
DOI: 10.1128/aem.45.6.1960-1962.1983