Retraction Note: Development and application of copper–nickel zirconium diboride as EDM electrodes manufactured by selective laser sintering
نویسندگان
چکیده
منابع مشابه
Clinical Evaluation of Prosthetic Sockets Manufactured By Selective Laser Sintering
A pilot study was undertaken to evaluate the clinical acceptance of prosthetic limb sockets manufactured using solid freeform fabrication (SFF). The fabrication of sockets for amputees is a natural application for SFF. The socket is the part of the prosthetic limb that fits onto the amputee’s residual limb. Each socket is custom manufactured for each individual amputee. Four amputees were succe...
متن کاملReactive Spark Plasma Sintering and Mechanical Properties of Zirconium Diboride–Titanium Diboride Ultrahigh Temperature Ceramic Solid Solutions
Ultrahigh temperature ceramics (UHTCs) such as diborides of zirconium, hafnium tantalum and their composites are considered to be the candidate materials for thermal protection systems of hypersonic vehicles due to their exceptional combination of physical, chemical and mechanical properties. A composite of ZrB2-TiB2 is expected to have better properties. In this study, an attempt has been made...
متن کاملQuantification of Part Surface Quality: Application to Selective Laser Sintering
Quantifying faults in manufacturing processes is a crucial concern, particularly in new manufacturing processes where continual product improvement is desired. We present an approach to incrementally diagnose fault patterns on surfaces of product components. Contemporary experimental and surface-analysis techniques are adapted at each step of the approach. Specifically, a maturing layeredmanufa...
متن کاملModeling of selective laser sintering/selective laser melting
Selective laser sintering and selective laser melting are powder based additive manufacturing (AM) process that can rapidly manufacture parts with comparable mechanical properties to conventional manufacturing methods directly from digital files. However, the processing recipe development and design optimization of AM parts are often based on trial and error which erodes the benefit of AM. Mode...
متن کاملMold Production by Selective Laser Sintering of Resin Coated Sands
Small sand molds for aluminum casting were produced by selective laser sintering (SLS) of pre-coated sands. A diode laser source with a rectangular laser beam spot was used to perform single and multi-layer processing tests. Subsequently, small sand molds were produced and tested in casting operations. Single layer processing was performed by changing laser power, scan rate and distance of the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Advanced Manufacturing Technology
سال: 2021
ISSN: ['1433-3015', '0268-3768']
DOI: https://doi.org/10.1007/s00170-020-06547-5