Responses of jointed rock masses subjected to impact loading
نویسندگان
چکیده
منابع مشابه
Microplane damage model for jointed rock masses
The paper presents a new microplane constitutive model for the inelastic behavior of jointed rock masses that takes into account the mechanical behavior and geometric characteristics of cracks and joints. The basic idea is that the microplane modeling of rock masses under general triaxial loading, including compression, requires the isotropic rock matrix and the joints to be considered as two d...
متن کاملDiscrete element modeling of explosion-induced fracture extension in jointed rock masses
The explosion process of explosives in a borehole applies a very high pressure on its surrounding rock media. This process can initiate and propagate rock fractures, and finally, may result in the rock fragmentation. Rock fragmentation is mainly caused by the propagation of inherent pre-existing fractures of the rock mass and also from the extension of the newly formed cracks within the intact ...
متن کاملVariation of Failure Mechanisms of Slopes in Jointed Rock Masses with Changing Scale
This paper demonstrates the ability of Shear Strength Reduction (SSR) analysis based on the Finite Element Method (FEM) to model the scale effects of discontinuity networks on the stability and failure mechanisms of slopes in blocky rock masses. Through three examples, it shows how these mechanisms depend on joint network geometry and change with increasing slope height. Introduction Scale Effe...
متن کاملDetermination of residual strength parameters of jointed rock masses using the GSI system
The Geological Strength Index (GSI) system, proposed in 1995, is now widely used for the estimation of the rock mass strength and the rock mass deformation parameters. The GSI system concentrates on the description of two factors, rock structure and block surface conditions. The guidelines given by the GSI system are for the estimation of the peak strength parameters of jointed rock masses. The...
متن کاملSimulation of hydraulic fracturing of jointed rock
This paper presents a modeling approach for three-dimensional simulation of hydraulic fracturing of jointed rock. The base for a successful computer based simulation for productive use is the ability to calculate the fractured volume with sufficient accuracy and efficiency. Especially in cases three dimensional effects have to be taken into account, the common commercial software tools in oil a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Rock Mechanics and Geotechnical Engineering
سال: 2018
ISSN: 1674-7755
DOI: 10.1016/j.jrmge.2017.12.006