Response variability due to randomness in Poisson’s ratio for plane-strain and plane-stress states
نویسندگان
چکیده
منابع مشابه
A Hybrid Stress Plane Element with Strain Field
In this paper, a plane quadrilateral element with rotational degrees of freedom is developed. Present formulation is based on a hybrid functional with independent boundary displacement and internal optimum strain field. All the optimality constraints, including being rotational invariant, omitting the parasitic shear error and satisfying Fliepa’s pure bending test, are considered. Moreover, the...
متن کاملCompound Strip Method for Plane Stress
The compound strip method (CSM) for plates is an expansion of the finite strip method (FSM) and was developed to incorporate the effects of the support elements in the analysis of linear elastic plate systems. In this paper the CSM is further expanded to analyze structures such as stiffened plates under loads in the plane of the plate or the so called plane-stress condition. Examples of these t...
متن کاملDeformation Behavior of a 70/30 Alpha Brass in Plane Stress/plane Strain
Generally a simple power law ~ = K E" (where K and n are empirical constants called the strength coefficient and the work hardening coefficient respectively) is used to describe plastic stress-strain dependence of deformable metals (1,2). This equation was employed by Low (3) to describe the uniaxial tensile behavior of an annealed 70/30 brass. The slope of the corresponding double logarithmic ...
متن کاملBending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition
The mechanical behavior of cold rolled sheets is significantly related to residual stresses that arise from bending and unbending processes. Measurement of residual stresses is mostly limited to surface measurement techniques. Experimental determination of stress variation through thickness is difficult and time-consuming. This paper presents a closed form solution for residual stresses, in whi...
متن کاملBending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition
The mechanical behavior of cold rolled sheets is significantly related to residual stresses that arise from bending and unbending processes. Measurement of residual stresses is mostly limited to surface measurement techniques. Experimental determination of stress variation through thickness is difficult and time-consuming. This paper presents a closed form solution for residual stresses, in whi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2006
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2005.03.072