Response to Ballistic Impact of Alumina-UHMWPE Composites

Microstructural Alterations in Alumina Ceramics Associated with Ballistic Impact Events

Surface topography and defect structures associated with ballistic impact in a commercial 94 percent alumina ceramic armor are described. Fracture surfaces were examined by scanning electron microscopy, augmenting previous replication electron fractography studies. Direct transmission electron microscopy was employed in characterizing defect structures in extracted fracture fragments on replica...

Ballistic failure processes in alumina

Tribological Property of FG/UHMWPE Composites

Fluorinated graphene/ultra high molecular weight polyethylene (FG/UHMWPE) composites were prepared by ultrasonic dispersion and hot pressing. The mechanical propertys and tribological property of pure UHMWPE and FG/UHMWPE composites were investigated by micro hardness tester and high-speed reciprocating friction tester. The wear volume of the sample was measured by the scanning electron microsc...

MULTI FRACTURE/DELAMINATION ANALYSIS OF COMPOSITES SUBJECTED TO IMPACT LOADINGS

A combined finite/ discrete element method is presented for modelling of composite specimens subjected to dynamic/impact loadings. The main task is set on developing an algorithm for simulation of potential bonding and debonding/delamination phenomena during impact or general dynamic loading conditions. In addition, full fracture analysis can also be performed. The proposed approach adopts a ge...

Sequential deposition of copper/alumina composites

Ceramic-metal composites have drawn considerable interest due to their mechanical, thermal and wear-resistant capabilities. High temperature processing of these materials when they are employed in electronic circuitry is not desirable, since elevated temperatures can irreversibly affect physical properties of the produced components. Wet chemical methods have potential advantages because they d...