Response Surface Optimization of Fixed Bed Adsorption of Cr+6 Onto Low-cost Adsorbent
نویسندگان
چکیده
منابع مشابه
Fluoride ion adsorption onto palm stone: Optimization through response surface methodology, isotherm, and adsorbent characteristics data
In some part of the world, groundwater source can become unsafe for drinking due to the high concentration of fluoride ions [1]. The low cost and facile-produced adsorbent like palm stone could effectively removed fluoride ions through adsorption process. In this dataset, the influence of fluoride ion concentration, solution pH, adsorbent dosage, and contact time on fluoride ion adsorption by p...
متن کاملAdsorption and Desorption of Sulfur Compounds by Improved Nano Adsorbent: Optimization Using Response Surface Methodology
Today, sulfur removal from fuels has improved by new adsorbents such as zeolites that needs extensive studies. This study investigates the feasibility of sulfur compounds adsorption on improved nano zeolite existing in organic fuels and desorption of them from nano-adsorbent.Some properties of improved nano zeolite were analyzed to receive better sulfur compounds adsorption.<e...
متن کاملFixed-bed Adsorption of Trichloroethylene onto Activated Carbon
The present work deals with the study of the adsorption of Trichloroethylene (TCE) onto a commercial granular activated carbon (GAC). Thermodynamic (batch) and dynamic (fixed-bed column) tests were carried out, under a wide range of operating conditions. In particular, adsorption isotherms were preliminary determined to support the investigation on a fixed-bed column at lab-scale. The main flui...
متن کاملCoexisting arsenate and arsenite adsorption from water using porous pellet adsorbent: Optimization by response surface methodology
Mesoporous pellet adsorbent developed from mixing at an appropriate ratio of natural clay, iron oxide, iron powder, and rice bran was used to investigate the optimization process of batch adsorption parameters for treating aqueous solution coexisting with arsenate and arsenite. Central composite design under response surface methodology was applied for optimizing and observing both individual a...
متن کاملAdsorption of Copper from Aqueous Solution Using Low- Cost Adsorbent
In this study activated carbon prepared from Adathoda vasica stem was used as adsorbent to remove Cu from an industrial waste water. For this purpose, high grade CuSO4.5H2O was used as heavy metal sample. Laboratory experimental investigation was carried out to identify the effect of pH (1.50 – 5.5), agitation time (30-240 min) varying temperature (30-50 ̊C) and varying biomass quantities (2,4,6...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Current World Environment
سال: 2020
ISSN: 2320-8031,0973-4929
DOI: 10.12944/cwe.15.3.28