Response Surface Methodology for Optimization of Copper Leaching from Refractory Flotation Tailings
نویسندگان
چکیده
منابع مشابه
Recovery of Copper from Copper Slag and Copper Slag Flotation Tailings by Oxidative Leaching
Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...
متن کاملCopper recovery from thickener overflow by electrocoagulation/flotation: optimization of response surface, modeling, and sludge study
The electrocoagulation/flotation process is a novel approach in mining industry that is implemented to return Cu metal to the production cycle, which improves copper recovery and reduces waste water. In this research work, the response surface methodology was applied to optimize the factors effective in Cu metal recovery and sludge volume produced from thickener overflow. To this end, the D-opt...
متن کاملVanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology
In this work, thealkaline roasting and sulfuric acid leaching processes were employed to extract vanadium from the magnetite ore of Saghand mine in central Iran. The response surface methodology based on the central composite design model was applied to optimize the parameters involved in the processes. The studied roasting parameters were temperature (900-1100 °C), sodium carbonate percentage ...
متن کاملIron leaching from bauxite ore in hydrochloric acid using response surface methodology
In this work, hydrochloric acid is used to remove iron impurities in the bauxite ore contained in the diasporite mineral located in the Sari region. The bauxite ore was calcined at different temperatures and times, and then dissolved in a hydrochloric acid solution. After determining the optimum calcination conditions in 1 h at 900 °C, the response surface methodology (RSM) with four factors in...
متن کاملOptimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology
Presence of heavy metal ions in wastewater is an important public concern. Adsorption are commonly used technique to remove various pollutants, including the ions, from contaminated water sources. However, common methods for adsorption are not completely efficient at low ion concentrations and the adsorbent should be improved in order to reaching the acceptable levels of adsorption efficiency. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Minerals
سال: 2018
ISSN: 2075-163X
DOI: 10.3390/min8040165