Response of moist paperboard during rapid compression and heating

Evaluation of Compression Testing and Compression Failure Modes of Paperboard

Effects of microwaving, and moist and dry heating on ruminal degradability of protein and dry matter in soybean meal

Two experiments were conducted to evaluate the effects of microwaving, autoclaving (moist heating), and roasting (dry heating) on gas production parameters and in situ rumen degradability of soybean meal (SBM). SBM was treated by roasting at 140℃ for 30 and 60 min, and at 160℃ for 30 and 60 min, autoclaving at 121℃ for 20 min, and microwaving for 2, 4, and 6 min. A gas production trial...

One dimensional models for the microwave heating of moist foodstuffs

Microwave ovens are frequently used in domestic situations for the heating of chilled foodstuffs which are generally approximately 80% by weight water. Rapid, internal heating are some of the key benefits over conventional ovens. The food industry utilises these attributes in a number of ways most in particular with the introduction of microwave ready meals and convenience food. It is important...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

chemical recycling of polycarbonate waste using conventional heating and microwave assisted method

پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...