Resistive sensor for high-power microwave pulse measurement
نویسندگان
چکیده
منابع مشابه
Measurement and Calibration of a High-Sensitivity Microwave Power Sensor with an Attenuator
In this paper, measurement and calibration of a high-sensitivity microwave power sensor through an attenuator is performed using direct comparison transfer technique. To provide reliable results, a mathematical model previously derived using signal flow graphs together with non-touching loop rule analysis for the measurement estimate (i.e., calibration factor) and its uncertainty evaluation is ...
متن کاملPulse pressure velocity measurement - a wearable sensor
Pulse pressure velocity measurements (PPV) may be a source of useful information on artery state. A 2007 guideline of the European Society of Hypertension recommends assessing arterial stiffness in patients with arterial hypertension, by measuring the PPV. Mechanical changes in the cardiovascular tree involved in the blood ejection have been measured at the thorax level and on the wrist using i...
متن کاملA microwave resistive squid for noise thermometry
2014 A SQUID magnetometer has been shown to work at 10 GHz with a significant enhancement of signal-to-noise over 30 MHz devices. This article describes how such enhancement could lead to faster determinations of absolute temperature using a resistive SQUID, i. e., a noise thermometer. A prototype 10 GHz resistive SQUID is described and its performance evaluated. The feasibility of using a 10 G...
متن کاملLow Power Resistive Oxygen Sensor Based on Sonochemical SrTi0.6Fe0.4O2.8 (STFO40)
The current paper reports on a sonochemical synthesis method for manufacturing nanostructured (typical grain size of 50 nm) SrTi0.6Fe0.4O2.8 (Sono-STFO40) powder. This powder is characterized using X ray-diffraction (XRD), Mössbauer spectroscopy and Scanning Electron Microscopy (SEM), and results are compared with commercially available SrTi0.4Fe0.6O2.8 (STFO60) powder. In order to manufacture ...
متن کاملSingle-shot measurement of >1010 pulse contrast for ultra-high peak-power lasers
Real-time pulse-contrast observation with a high dynamic range is a prerequisite to tackle the contrast challenge in ultra-high peak-power lasers. However, the commonly used delay-scanning cross-correlator (DSCC) can only provide the time-consumed measurements for repetitive lasers. Single-shot cross-correlator (SSCC) becomes essential in optimizing laser systems and exploring contrast mechanis...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Lithuanian Journal of Physics
سال: 2004
ISSN: 1648-8504
DOI: 10.3952/lithjphys.44503