Resistance Welding of Heat Resisting Alloys
نویسندگان
چکیده
منابع مشابه
Resistance Spot Welding: A Heat Transfer Study
A heat transfer study of resistance spot welding has been conducted both theoretically and experimentally. A numerical solution based on a finite difference formulation of the heat equation has been developed to predict temperature distributions as a function of both time and position during the welding process. The computer model also predicts the temperature distribution through the copper el...
متن کاملLaser Welding of Magnesium Alloys
Aiming at establishing a reliable welding technique for magnesium alloys, the laser weldability of different types of magnesium alloys has been investigated using a high-brightness disc laser. It was found that high quality joints could be fabricated in the case of wrought type alloys when a certain defocusing level was optimized for the employed high-brightness laser beam of the newly develope...
متن کاملLaser Welding of Thin Sheet Magnesium Alloys
Magnesium and its alloys are active materials, and the oxide can easily form when they react with air and moisture (Czerwinski 2002). In addition, magnesium and its alloys are flammable and require strict safeguards during the manufacturing process. These disadvantages make the processing of magnesium alloys into finished products more challenging. These drawbacks cause defects such as cracks, ...
متن کاملExperimental simulation of surface pitting of degraded electrodes in resistance spot welding of aluminium alloys
A novel experimental technique, using specially designed electrodes (with machined annular and circular pits, and central cavities), was developed to simulate the effects of pitting morphology of the electrode tip face on weld nugget size and joint strength in resistance spot welding of aluminium alloys. Results of the experimental simulations indicate that the distribution of electrode contact...
متن کاملTIG Welding of Ti Alloys with In-Process Monitoring
Titanium alloys have found increased applications in various industrial sectors. One of the critical issues in quality control is the weld penetration during welding. In the present paper, tungsten inert gas (TIG) welding of Ti-6Al-4V alloy with and without an activating flux was conducted. The effect of the activating flux on Ti alloy welding was investigated. A data acquisition system was use...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1958
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.27.264