Resistance to Abrasive Wear and Volume Fraction of Carbides in Cast High-manganese Austenitic Steel with Composite Structure
نویسندگان
چکیده
منابع مشابه
Heat treatment of high manganese type X57MnAl27-5 austenitic steel
In the paper, the influence of heat treatment parameters on microstructure and mechanical properties of high manganese type X57MnAl27-5 austenitic steel was investigated. The as-forged bar with diameter of 15 mm were underwent a saturation process at six different temperatures. The microstructural changes of austenite and the influence of heat treatment on the mechanical properties were conside...
متن کاملEffect of annealing process on microstructure and mechanical properties of high manganese austenitic TWIP steel
In the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (Fe-30Mn-4Al-4Si-0.5C) was investigated. X-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. The res...
متن کاملMicrostructures and Wear Performance of PTAW Deposited Ni-Based Coatings with Spherical Tungsten Carbide
The Ni-based coatings with different content of spherical tungsten carbide were deposited by plasma transfer arc welding (PTAW) method on 304 austenitic stainless steel sheets in this study. The microstructure and wear property of spherical tungsten carbide particle reinforced composite coatings were investigated by means of optical microscope, scanning electron microscope (SEM), X-ray diffract...
متن کاملTHE EFFECT OF HEAT TREATMENT ON ABRASIVE WEAR RESISTANCE OF Fe-34Cr-4.5C%WT HARDFACING ALLOY
Abstract: Hardfacing is one of the most useful and economical ways to increase the service life of components subjected to abrasive wear. Iron based hardfacing alloys have long been considered as candidate coatings for wear-resistant applications in industry. In the present work two layer of Fe-34Cr-4.5C%wt hardfacing alloy was deposited on ASTM A36 carbon steel plates by SMAW method. The m...
متن کاملEvaluating Wear Properties of AISI 420 Martensitic Stainless Steel after Laser Transformation Hardening
As the turbine industries need to manufacture turbine blades made of martensitic stainless steel AISI 420 with high toughness and wear resistance, local laser hardening has become more and more important. In this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Foundry Engineering
سال: 2015
ISSN: 2299-2944
DOI: 10.1515/afe-2015-0092