Resistance Spot Welding Properties Improvement through Post Weld Impact Treatment
نویسندگان
چکیده
منابع مشابه
Design Parameters Selection and Optimization of Weld Zone Development in Resistance Spot Welding
This paper investigates the development of weld zone in Resistance Spot Welding (RSW) which focuses on weld nugget and Heat Affected Zone (HAZ). The effects of four factors namely weld current, weld time, electrode force and hold time were studied using a general 2 factorial design augmented by five centre points. The results of the analysis showed that all selected factors except hold time exh...
متن کاملResistance Spot Welding: A Heat Transfer Study
A heat transfer study of resistance spot welding has been conducted both theoretically and experimentally. A numerical solution based on a finite difference formulation of the heat equation has been developed to predict temperature distributions as a function of both time and position during the welding process. The computer model also predicts the temperature distribution through the copper el...
متن کاملWeld Magnification Factor Approach in Cruciform Joints Considering Post Welding Cooling Medium and Weld Size
The objective of this research is to develop an experimental-theoretical analysis about the influence of the cooling medium and the geometry of the welding bead profile in fatigue life and the associated parameters with structural integrity of welded joints. A welded joint with cruciform geometry is considered using SMAW (Shielded Metal ArcWelding), plates in structural steel ASTM A36 HR of 8 m...
متن کاملEvaluation of mechanical properties of nanostructured Al 6061 alloy weldment during resistance spot welding process
In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...
متن کاملResistance spot welding of AISI 201 stainless steel: The relationship between welding current, microstructure, mechanical properties and failure mode
In this paper, resistance spot welding process of AISI 201 stainless steel is studied experimentally. For this purpose, effect of welding current on quality of weld is investigated and relationships between welding current and fusion zone characteristics are examined. For determining mechanical properties such as maximum load and fracture mode, tensile - shear test of spot welds is performed. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering and Applied Sciences
سال: 2019
ISSN: 1816-949X
DOI: 10.36478/jeasci.2019.3194.3199