Resistance Spot Welding of SUS304/CP-Ti Plates Using Inserted Stacking Metal Foils with Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> Supercooling Alloy Composition
نویسندگان
چکیده
منابع مشابه
Evaluation of mechanical properties of nanostructured Al 6061 alloy weldment during resistance spot welding process
In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...
متن کاملEvaluation of mechanical properties of nanostructured Al 6061 alloy weldment during resistance spot welding process
In this study, The Al 6061 alloy sheets were produced by Cryorolling process and then were welded by resistance spot welding method. In this regard, the solution treated Al 6061 alloy cryorolled subsequently up to 90% reduction in thickness to produce nanostructure alloy. The cryorolled sheets were then subjected to aging treatment (130˚C-30h) in order to obtain simultaneous strength and ductil...
متن کاملresistance spot welding of nanostructured Al 2024 alloy and Evaluation of mechanical properties Weldment
In this research in order to improve the mechanical properties of Aluminium alloy 2024, nanostructure Aluminum sheets were first produced by Cryorolling process and then was welded by resistance spot welding method. For this purpose, the samples solution treated at 495˚C for 55 minute and subsequently cryorolled up to 85% reduction in thickness. For obtaining simultaneous strength and ductility...
متن کاملresistance spot welding of nanostructured Al 2024 alloy and Evaluation of mechanical properties Weldment
In this research in order to improve the mechanical properties of Aluminium alloy 2024, nanostructure Aluminum sheets were first produced by Cryorolling process and then was welded by resistance spot welding method. For this purpose, the samples solution treated at 495˚C for 55 minute and subsequently cryorolled up to 85% reduction in thickness. For obtaining simultaneous strength and ductility...
متن کاملCurrent Measurement of Resistance Spot Welding Using DSP
This study aims to calculate the resistance spot welding current digitally at a fast speed. The conventional open-loop spot welding machine cannot measure the current, thus the welding quality varies. The welding time of spot welder is very short, but the welding current is strong and it is hard to be measured, thereby resulting in the uncontrollability of welding quality. This study uses a hig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 2019
ISSN: 0514-5163,1880-7488
DOI: 10.2472/jsms.68.199