Resistance spot welding of a magnesium alloy AZ31B plate to a 1050 aluminum plate using Ag insert metal
نویسندگان
چکیده
منابع مشابه
Microstructure and Corrosion Behavior of Laser Welded Magnesium Alloys with Silver Nanoparticles
Magnesium alloys have gained increased attention in recent years in automotive, electronics, and medical industry. This because of magnesium alloys have better properties than aluminum alloys and steels in respects of their low density and high strength to weight ratio. However, the main problems of magnesium alloy welding are the crack formation and the appearance of porosity during the solidi...
متن کاملDamping analysis of a free aluminum plate
HAL is a multi-disciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers. L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau...
متن کاملPulsed Nd:YAG Laser Dissimilar Welding of Grade 2 Titanium Alloy to 3105-O Aluminum Alloy using AlSi5 Filler Metal
A special form of laser spot welding is introduced to overlap dissimilar welding of titanium (G2) to 3105-O aluminum alloy. A welding tactile seam tracking design using following pulses that result to a circular seam leads to spot like shape laser welding. This technique was conducted to joint overlapped grad 2 Titanium alloy (Ti G2) to 3105-O Al alloy, with 1, and 0.5 mm thicknesses respective...
متن کاملConstitutive Modelling of AZ31B-O Magnesium Alloy for Cryogenic Machining
The success of a FE model for metal cutting process is strongly dependent on the accurate characterization of the workpiece material, under similar conditions as those found in metal cutting. In this paper, dynamic shear tests using a Gleeble machine have been performed on 4 mm thickness disks of AZ31B-O magnesium alloy, using a special designed tool. In order to include the effects of the cryo...
متن کاملBimetal friction stir welding of aluminum to magnesium
FSW material flow and phase transformation were studied at the interface of dissimilar welding of Al 6013 to Mg. Defect free butt weld was obtained when aluminum and magnesium test plates were placed in the advancing side and retreating side respectively, and the tool was placed 1 mm off the weld centerline into the aluminum side. In order to understand how the materials flow during FSW, steel ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 2004
ISSN: 0451-5994,1880-8018
DOI: 10.2464/jilm.54.293