Residual Stress Measurement in Socket Welded Joints by Neutron Diffraction.
نویسندگان
چکیده
منابع مشابه
Residual Stresses in Butt and Socket Welded Joints
A finite element scheme for simulation of welding residual stresses is presented in this paper. Detailed thermal and residual stress analyses for butt-welded and socket-welded pipes are performed using ANSYS and ABAQUS. The calculated distribution of axial stress and hoop stress at welded joint are validated against experimental results. Furthermore, residual stress relaxation under high amplit...
متن کاملResidual Stress Measurement of Laser-Engineered Net Shaping AISI 410 Thin Plates Using Neutron Diffraction
In an attempt to relate the laser-engineered net shaping (LENS) process parameters, laser power and laser travel speed, to the quality of LENS-produced parts, strain measurements were taken at several predetermined points within seven LENS AISI 410 thin plates using the neutron diffraction method. The residual stresses at these points were then calculated using the measured strain values to asc...
متن کاملNeutron diffraction measurement of stress-induced transformation in superelastic NiTi
The formation of stress-induced martensite in superelastic NiTi was studied by neutron diffraction during uniaxial compressive loading and unloading. The respective phase fractions were determined as a function of the applied stresses using a Rietveld refinement with a March–Dollase texture formulation. Before loading, the specimen was fully austenitic. At the highest applied stress of 2625 MPa...
متن کاملRelation between Residual Stress and Fatigue Strength for Electron Beam Welded Joints of Sheet Metal
Residual stresses in welds significantly affect the fatigue strength and stress corrosion crack resistance of the weld joint, and therefore, numerous studies have been made about the effects. The residual stress induced by electron beam welding (EBW) has also been researched in various approaches, but many of the study reports dealt with thick plates (50 mm or thicker) only.1–5) This was becaus...
متن کاملInvestigation on the Residual Stress State of Drawn Tubes by Numerical Simulation and Neutron Diffraction Analysis
Cold drawing is widely applied in the industrial production of seamless tubes, employed for various mechanical applications. During pre-processing, deviations in tools and their adjustment lead to inhomogeneities in the geometry of the tubes and cause a gradient in residuals. In this paper a three dimensional finite element (3D-FE)-model is presented which was developed to calculate the change ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1995
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.44.1464