Residual stress measurement in PVD optical coatings by microtopography
نویسندگان
چکیده
منابع مشابه
Properties of PVD hard coatings
Last 2 to 3 decades application of PVD (physical vapour deposition) hard coatings exponentially grows. However, the use of hard, thin films in the field of machine elements is the exception rather than the rule. The main problem lies in the relatively high contact pressure and the very complex loading of machine components, which demand a hard resistance surface and a tough core. In seminar it ...
متن کاملPVD coatings on aluminium substrates
It is well known that aluminium is today the most widely used metallic material besides steel. The mechanical characteristics of aluminium offer an increasing application field, especially where lightweight constructions are required. The demands for improved characteristics such as higher strength and greater durability are achieved by the development of new aluminium alloys. Continuous effort...
متن کاملResidual Stress in Ground WC-Co Coatings
High velocity oxygen fuel (HVOF) spray technique is one of the leading technologies that have been proposed as an alternative to the replacement of electrolytic hard chromium plating in a number of engineering applications. In this study, WC-Co powder was coated on AISI1045 steel using high velocity oxy fuel (HVOF) method. The sinψ method was used to evaluate the through thickness residual stre...
متن کاملNanohardness and Residual Stress in TiN Coatings
TiN films were prepared by the Cathodic arc evaporation deposition method under different negative substrate bias. AFM image analyses show that the growth mode of biased coatings changes from 3D island to lateral when the negative bias potential is increased. Nanohardness of the thin films was measured by nanoindentation, and residual stress was determined using Grazing incidence X ray diffract...
متن کاملTechnique in Measuring Residual Stresses of Physical Vapor Deposition (PVD) Hard Coatings
Residual stresses of physical vapor deposition (PVD) hard coatings can be measured using X-ray diffraction (XRD) methods under either conventional d-sin2 ψ mode or glancing incident (GIXRD) mode, in which substantial uncertainties exist depending on the applied diffraction parameters. This paper reports systematic research on the effect of the two analytical modes, as well as the anisotropic el...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Measurement
سال: 2011
ISSN: 0263-2241
DOI: 10.1016/j.measurement.2010.11.010