Residual Stress Induced Phase Transformation in Y-TZP and WC/Y-TZP.
نویسندگان
چکیده
منابع مشابه
Pre-sintered Y-TZP sandblasting: effect on surface roughness, phase transformation, and Y-TZP/veneer bond strength
OBJECTIVES. Sandblasting is a common method to try to improve the Y-TZP/veneer bond strength of dental prostheses, however, it may put stress on zirconia surfaces and could accelerate the t→m phase transformation. Y-TZP sandblasting before sintering could be an alternative to improve surface roughness and bonding strength of veneering ceramic. The aim of this study was to analyze the effect of ...
متن کاملThermal gradients and residual stresses in veneered Y-TZP frameworks.
OBJECTIVES The occurrence of "chipping" of all-ceramic restorations with Y-TZP frameworks has resulted in various designs and cooling procedures recommended for reducing such behavior. In this paper the temperature gradients during fast and slow cooling for conventional and anatomical designs are compared as well as an optical procedure to directly compare the influence of cooling rate on resid...
متن کاملBiaxial flexural strength and phase transformation of Ce-TZP/Al2O3 and Y-TZP core materials after thermocycling and mechanical loading
PURPOSE The purpose of the present study was to evaluate the effect of thermocycling and mechanical loading on the biaxial flexural strength and the phase transformation of one Ce-TZP/Al2O3 and two Y-TZP core materials. MATERIALS AND METHODS Thirty disc-shaped specimens were obtained from each material. The specimens were randomly divided into three groups (control, thermocycled, and mechanic...
متن کاملCad/cam Y-tzp–based Restorations
Tel: 504-619-8607 Fax: 504-619-8741 E-mail: [email protected] Prospective clinical studies are evaluating the long-term success of Y-TZP–based all-ceramic FPDs. Y-TZP–based infrastructures for crowns and FPDs present favorable physical, mechanical, and optical properties. Some Y-TZP–based restorative systems use CAD/CAM technology. Nevertheless, technicians should be able to employ traditiona...
متن کاملBonding of Y-TZP to dentin: effects of Y-TZP surface conditioning, resin cement type, and aging.
PURPOSE To evaluate the effects of two surface treatments, aging, and two resin cements on shear bond strength between dentin and yttrium-stabilized tetragonal zirconia polycrystal ceramic (Y-TZP). MATERIALS AND METHODS Eighty human molars were embedded in acrylic resin and sectioned 3 mm below the occlusal plane. These teeth and 80 cylindrical Y-TZP specimens (height, 4 mm; diameter, 3.4 mm)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1994
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.41.843