Residual Stress Characteristics of High-Temperature Protective MCrAlY Coating.

Coating thickness effect on stress distribution of coated cylinder head considering residual stress

This paper presents the coating thickness effect on the stress distribution of a coated cylinder head. A typical thermal barrier coating was applied on a diesel engine cylinder head. Thus, the residual stress which occurred during the plasma thermal spraying was also considered. The coating system consisted of two layers a metallic bond coat and a ceramic top coat. The bond coat thickness is co...

Low-Temperature Self-Healing of a Microcapsule-Type Protective Coating

Low-temperature self-healing capabilities are essential for self-healing materials exposed to cold environments. Although low-temperature self-healing concepts have been proposed, there has been no report of a microcapsule-type low-temperature self-healing system wherein the healing ability was demonstrated at low temperature. In this work, low-temperature self-healing of a microcapsule-type pr...

Effects of AlN Coating Layer on High Temperature Characteristics of Langasite SAW Sensors

High temperature characteristics of langasite surface acoustic wave (SAW) devices coated with an AlN thin film have been investigated in this work. The AlN films were deposited on the prepared SAW devices by mid-frequency magnetron sputtering. The SAW devices coated with AlN films were measured from room temperature to 600 °C. The results show that the SAW devices can work up to 600 °C. The AlN...

Some aspects of elemental behaviour in HVOF MCrAlY coatings in high-temperature oxidation

Characteristic Points of Stress-Strain Curve at High Temperature

Determination of critical points on hot stress-strain curve of metals is crucial in thermo-mechanical processes design. In this investigation a mathematical modeling is given to illustrate the behavior of metal during hot deformation processes such as hot rolling. The critical strain for the onset of dynamic recrystallization has been obtained as a function of strain at the maximum stress. In a...