Residual Stress Analysis of Ceramic Spraying Coating based on Thermal Spray Process

Numerical (CFD) Analysis of Thermal Spray Coating Process

A Theoretical Model for Predicting Residual Stress Generation in Fabrication Process of Double-Ceramic-Layer Thermal Barrier Coating System

Residual stress arisen in fabrication process of Double-Ceramic-Layer Thermal Barrier Coating System (DCL-TBCs) has a significant effect on its quality and reliability. In this work, based on the practical fabrication process of DCL-TBCs and the force and moment equilibrium, a theoretical model was proposed at first to predict residual stress generation in its fabrication process, in which the ...

Influence of Vacuum Heat Treatment on the Residual Stress of Thermal Spray Cermet Coatings

and light microscopy were used to identify the changes after the heat-treatment. Microhardness and indentation modulus values were also investigated to analyse the changes in the mechanical properties after the heat-treatment. Results of this investigation indicated that the residual stress gradient within the coating material decreases after the heat-treatment, and the stress field in the subs...

Warm spraying-a novel coating process based on high-velocity impact of solid particles.

In recent years, coating processes based on the impact of high-velocity solid particles such as cold spraying and aerosol deposition have been developed and attracting much industrial attention. A novel coating process called 'warm spraying' has been developed, in which coatings are formed by the high-velocity impact of solid powder particles heated to appropriate temperatures below the melting...

Coating thickness effect on stress distribution of coated cylinder head considering residual stress

This paper presents the coating thickness effect on the stress distribution of a coated cylinder head. A typical thermal barrier coating was applied on a diesel engine cylinder head. Thus, the residual stress which occurred during the plasma thermal spraying was also considered. The coating system consisted of two layers a metallic bond coat and a ceramic top coat. The bond coat thickness is co...