Residual strength evaluation by DBEM for a cracked lap joint
نویسندگان
چکیده
منابع مشابه
Residual Strength Improvement of an Aluminium Alloy Cracked Panel
This work deals with the application of the micromechanical Gurson-Tvergaard (GT) model to the determination of the residual strength of analuminumflat stiffened panel (2024 T3) with a central through crack, by means of finite element simulations. The load condition is represented by a monotonic traction along the direction orthogonal to the crack plane. The used Finite Element code is WARP 3D,...
متن کاملResidual Strength Analyses of Riveted Lap-Splice Joints
Aging aircraft may develop multiple-site damage (MSD) that can reduce the structural integrity of fuselage structures. The existence of small cracks emanating from adjacent rivet holes in a fuselage lap-splice joint is of major concern. Small collinear cracks greatly reduce the residual strength of a panel with a lead crack. Recent studies predicting the residual strength of flat and curvilinea...
متن کاملResidual strength assessment for a butt joint in MSD condition
The present work summarises a numerical procedure aimed to the residual strength assessment of a cracked butt joint, based on R-curve analysis and plastic collapse prediction. In a linear elastic fracture analysis, the SIF’s (Stress Intensity Factors) evaluation is based on the use of the Dual Boundary Element Method, as implemented in the BEASY code. A two -dimensional approximation (plane str...
متن کاملFracture mechanics-based life prediction of a riveted lap joint
In this paper, three-dimensional modeling of the fatigue crack growth profiles was performed in a simple riveted lap joint. Simulation results showed that mode I was dominated on the one side of the plates and the crack straightly grew on this side, while the other side of the plates was in a mixed-mode condition and the crack propagation path was not straight on this side. Afterward, the fract...
متن کاملReal-time monitoring of laser welding of galvanized high strength steel in lap joint configuration
Two different cases regarding the zinc coating at the lap joint faying surface are selected for studying the influence of zinc vapor on the keyhole dynamics of the weld pool and the final welding quality. One case has the zinc coating fully removed at the faying surface; while the other case retains the zinc coating on the faying surface. It is found that removal of the zinc coating at the fayi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frattura ed Integrità Strutturale
سال: 2015
ISSN: 1971-8993
DOI: 10.3221/igf-esis.35.58