Residual strain distribution in casting ingot of multi-crystalline silicon
نویسندگان
چکیده
منابع مشابه
Development of Multi-wire Edm Slicing Method for Silicon Ingot
INSTRUCTIONS The diameter of silicon wafer becomes larger in order to increase the number of chips per one wafer. For such a larger diameter silicon ingot is mainly sliced by using multi-wire method, in which a long thin wire is used with slurry. In this method, several hundreds of wafers could be sliced at the same time. However there are still problems remained, such as large cracks, slurry t...
متن کاملEffect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics
Nanowires (NWs) are recently used in several sensor or actuator devices to improve their ordered characteristics. Silicon nanowire (Si NW) is one of the most attractive one-dimensional nanostructures semiconductors because of its unique electrical and optical properties. In this paper, silicon nanowire (Si NW), is synthesized and characterized for application in photovoltaic device. Si NWs are ...
متن کاملOhmic Contact of Cu/Mo and Cu/Ti Thin Layers on Multi-Crystalline Silicon Substrates
Cu-Mo and Cu-Ti contact structures were fabricated on multi-crystalline silicon substrates to provide a low resistance ohmic contact. Deposition steps are done in an excellent vacuum chamber by means of electron beam evaporation and samples are then annealed for the realization of an efficient alloy layer. The effects of process parameters such as film thickness, annealing duration and temp...
متن کاملProperties and Control of Fluxes for Ingot Casting and Continuous Casting
Present chemical-physical characteristics of ingot and continuous casting powders can be critically evaluated pointing out history of invention of these materials. In an original tone, pioneering nature of first developments of casting powders will be described, illustrating empirical know-how of casting powders technology, based on trial-and-error method. It will be originally emphasized that ...
متن کاملLight Induced Degradation in Manufacturable Multi-crystalline Silicon Solar Cells
Traditional Czochralski grown Si solar cells are known to suffer from light induced degradation (LID) which adversely affects the minority carrier lifetime. Multi-crystalline Si has also been shown to show a similar degradation/recovery cycle after a phosphorus gettering step. In this paper, promising ribbon and cast multi-crystalline Si are examined for light induced degradation. High oxygen m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2011
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2011.01.003