RESEARCHES ON AUSTENITIC MALLEABLE CAST IRON (I)

Cast Iron Metallurgy

Cast iron (CI) is one of the oldest materials in commercial use. It has excellent compressive strength and is commonly used for structures that require this property, as well as for water and sewer lines. This article explains CI metallurgy and why the understanding of this metallurgy is key to understanding other ferrous materials and alloys. The composition of cast iron (CI) varies significan...

Mechanism of silicon influence on the chill of cast iron

In this work an analytical solution of general validity is used to explain mechanism of the silicon influence on the absolute chill tendency (CT) and chill (w) of cast iron. It is found that CT can be related to nucleation potential of graphite (Nv), growth parameter (μ) of eutectic cells, temperature range (∆Tsc) and the pre-eutectic austenite volume fraction (fγ). It has been shown that silic...

Literature search - Deteriorated Graphite Structures on Cast Iron Skins

The fatigue strength offerritic ductile iron, Grade EN-GJS-400-18U-LT. was determined for large section castings measuring 4 by 24 by 24 inches. Fatigue testing was conducted in bending fatigue in order to determine the influence of surface conditions on fatigue strength. Test specimens with various surface conditions were evaluated, including notched and un-notched specimens, as well as those ...

Gray cast-iron water pipe metallurgy

The results of a metallographic study of grey cast iron water pipes are reported. These pipes had been installed between 1885 and 1973 in eight different water systems. Each pipe had been extracted during scheduled maintenance or failure repairs to provide data for a larger study to produce a methodology for determining the residual life of grey cast iron pipes. This metallographic study was co...

Circumferential failures in grey cast iron pipes