Research progress on basalt fiber-based functionalized composites

نویسندگان

چکیده

Abstract Basalt fiber (BF) is a kind of high-performance rising rapidly in recent years. BF typically used the field structure engineering because its high strength and modulus. The preparation BF-based composites first requires surface modification to improve interfacial bonding between resin matrix. With continuous deepening research on modification, researchers have found that special can obtain functionalized composites, this has received extensive attention In article, work functional years are summarized reviewed from aspects electromagnetic shielding, water treatment, catalytic function fire insulation. Finally, article summarizes methods, proposes development trends direction composites.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites

One of the greatest impediments to use polymer-matrix composites is their susceptibility to degradation when exposed to the elevated temperatures and the limited knowledge on the thermal and mechanical properties of these composites at such temperatures. The objective of this study is to evaluate the effects of accelerated heat aging on the tensile properties of the Woven Basalt/Phenolic (WBP) ...

متن کامل

Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites

The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...

متن کامل

Basalt fiber–epoxy laminates with functionalized multi-walled carbon nanotubes

Cross-ply laminates reinforced with basalt fibers and functionalized multi-walled carbon nanotubes (MWCNTs) were fabricated from unidirectional epoxy prepregs. MWCNTs with varied surface conditions were prepared by oxidization or esterification, and then dispersed into a DGEBA epoxy system. The dispersion of the MWCNTs in the epoxy was improved by surface modification, resulting in improved com...

متن کامل

Research Progress on F-P Interference—Based Fiber-Optic Sensors

We review our works on Fabry-Perot (F-P) interferometric fiber-optic sensors with various applications. We give a general model of F-P interferometric optical fiber sensors including diffraction loss caused by the beam divergence and the Gouy phase shift. Based on different structures of an F-P cavity formed on the end of a single-mode fiber, the F-P interferometric optical sensor has been exte...

متن کامل

creep behavior of basalt and glass fiber reinforced epoxy composites

the creep behavior of basalt fiber reinforced epoxy (bfre) and glass fiber reinforced epoxy (gfre) composites was studied through tensile testing at high temperature. to study the effect of reinforcing epoxy, the micro glass powder (mgp) was added at various volume percentage into the epoxy resin in bfre composites. the initial strain for all the specimens were evaluated and compared with each ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Reviews on Advanced Materials Science

سال: 2023

ISSN: ['1605-8127', '1606-5131']

DOI: https://doi.org/10.1515/rams-2022-0300