Research on Combined Hot Extrusion Forming Process of Alternator Poles
نویسندگان
چکیده
منابع مشابه
Numerical modeling of claw-poles alternator
The paper present a program of modeling of a claw-poles alternator with the program Magnet 6.11, which after the input data of machine realize the geometrical model for numerical analyzes. After analysis, the program can be changed automatically and made a new model, that can be analyzed automatically and not being necessarily construction the model with the drawing program each time its necess...
متن کاملInvestigation of hot metal gas forming process of square parts
Aluminum alloys are considered a lot in the automotive and aerospace industry because of their high strength to weight ratio. In this manuscript, the gas forming process of aluminum AA6063 tubes at high temperatures up to 500°C is investigated, through experimental and numerical tests. Therefore, an experimental setup is prepared and so, tube specimens are formed in a die with square cross sect...
متن کاملInfluence of degassing on hot-melt extrusion process.
The present study aimed to evaluate the effect of degassing on an extrusion process, with respect to extrudate quality and drug release properties. Processed formulations were extruded with and without a degassing vent port at various locations along the barrel. All the experiments were performed under constant processing temperature, feeding rate, and screw speed. During the extrusion process,...
متن کاملStudy of Electromagnetic Field in Claw-poles Alternator
The paper presents the tridimensional analysis of electromagnetic field of an claw poles alternator, in whose construction has been used non-magnetic material, such aluminum, that form the rings in the rotor’s structure. This structure aims to establish lower levels of saturation in the claw-pole of Lundell alternator. Reducing the level of saturation in the rotor, lead to reduction of the loss...
متن کاملInvestigation of the Forming Force in Torsion Extrusion Process of Aluminum Alloy 1050
In this paper, torsion extrusion (TE) process on 1050 aluminum alloy was investigated by simulation as a severe plastic deformation (SPD) method and the effects of friction coefficient, angular velocity of the rotating die and punch speed on maximum punch force were studied. A finite element (FE) model was developed to simulate the TE process via DEFORM software. The FE results were validated co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science and Chemical Engineering
سال: 2013
ISSN: 2327-6045,2327-6053
DOI: 10.4236/msce.2013.15004