Research of materials of Fe-C-Si and Fe-C-Al systems
نویسندگان
چکیده
منابع مشابه
Production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying
In this research, the production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying was investigated and evaluated. Ferrotitanium (containing 70%Ti), titanium and graphite were used as the raw materials. Initial mixtures were milled in different time durations under the pure nitrogen atmosphere with the pressure of 5atm. The results showed that when N2 pressure is 5 at...
متن کاملKinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel
In the current study, the recrystallization behavior of 75% cold-rolled Fe-22Mn-10Al-1.4C steel during annealing at 750, 770, 790, 810, and 830°C was studied. X-ray diffraction patterns and optical microscopy were used to characterize microstructures. The Vickers Micro-hardness test was used to characterize recrystallization kinetics during annealing. Johnson-Mehl-Avrami-Kolmogorov (JMAK) model...
متن کاملبررسی خواص سایشی آلیاژهای Al-(5-13)Si-Fe
در این تحقیق تاثیر آهن (wt%2-2/0) بر خواص سایشی آلیاژهای Al-(5-13)Si مورد بررسی قرار گرفته است. آزمایش‌های سایش در دمای محیط، بار N45، سرعت m/s13/0 و مسافت m1000 به روش پین روی دیسک انجام شدند. بر اساس نتایج به دست آمده، در غلظت‌های آهن کمتر از غلظت بحرانی (wt%2/1 در این تحقیق)، افزایش سیلیسیم موجب شکل‌گیری صفحات ظربف AlFeSi در نواحی بین دندریتی شده و بواسطه افزایش سختی زمینه و کاهش سیلان پلاست...
متن کاملModification of Primary Si Crystals and Fe-rich Intermetallics in LM28 Al Alloy Fabricated Through Thixoforming
In the present research, thixoforming route was carried out in order to enhance the microstructural features of LM28 piston alloy. Typical microstructure of this alloy was composed of coarse, polygonal primary silicon particles, eutectic matrix and intermetallic phases. Thermal analysis was carried out to study the solidification path of the base alloy and determine the major arrest temperature...
متن کاملProduction of Fe-C Powders with Improved Structure
Production of Fe-C alloy powders by mechanical alloying was studied. Fe and graphite elemental powder mixtures containing 0.8 and 1.5wt.% graphite were mechanically alloyed using a planetary ball mill. The structural changes of powder particles during mechanical alloying were studied by x-ray diffractometery, scanning electron microscopy and microhardness measurements. For both compositions, me...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2019
ISSN: 2261-236X
DOI: 10.1051/matecconf/201929800092