Research and Realization of Servo Control System Based on Medical Centrifuge
نویسندگان
چکیده
The power of the medical centrifuge is provided by permanent magnet synchronous motor, so AC control system motor directly determines overall performance centrifuge. In this paper, controlled object, DSP28335 used as main chip, and combined with vector strategy, servo designed. Finally, according to design scheme, soft hard completed, test carried out. results show that designed has fast response, good tracking performance, stable operation, a certain market application prospect.
منابع مشابه
The Research on Servo Control System for AC PMSM Based on DSP
Abstract. This paper use the digital signal processor (DSP) TMS320LF2407A control chip is adopted as core of the control system. Three closed loop of the controller, namely electricity, speed and displacement, were designed. Using space voltage vector pulse wide modulation technology (SVPWM), constructed a servo system of permanent magnet synchronous motor(PMSM) based on DSP. Through debugging ...
متن کاملModeling, Control and Simulation of Cascade Control Servo System for one Axis Gimbal Mechanism
The gimbal stabilization mechanism is used to provide the stability to an object mounted on the gimbal by isolating it from the base angular motion and vibration. The purpose of this paper is to present a model of control servo system for one axis gimbal mechanism using a cascade PID controller. The gimbal torque relationships are derived by taking into consideration the base angular motion. Th...
متن کاملVelocity Control of Electro Hydraulic Servo System by Tracking Method
This paper proposes an efficient Tracking method for velocity control of an electro-hydraulic servo system (EHSS) in the presence of flow nonlinearities and internal friction. The tracking method controller is a kind of feedback error learning structure. In the proposed method, the Feedback Error Learning (FEL) algorithm is used to control the velocity. There is no need to compute the system ja...
متن کاملResearch of Vacuum Servo System Based on the Single Neural Adaptive Pid Control Strategy
A method constructing vacuum servo control system with a combined vacuum generator is proposed and the single neural adaptive PID control strategy is also proposed due to the inherent defects of the vacuum servo system in this paper. The influence of the system parameters to the characteristics of the vacuum servo system is analyzed and discussed. The simulation and the experiment show that the...
متن کاملAdaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory
In this paper, based on feedback linearization control method and using a special PI (propotational integrator) regulator (IP) in combination with a feed-forward controller, a three-phase induction servo-drive is speed controlled. First, an observer is employed to estimate the rotor d and q axis flux components. Then, two input-output state variables are introduced to control the dynamics of to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2022
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2383/1/012153