Research and Development of Laser Materials Processing Using High Power Laser.
نویسندگان
چکیده
منابع مشابه
Recent Development in Laser Materials Processing
Recent research and development in laser machining and laser forming processes is reviewed. In the laser machining area, striation formation and prediction, and gas jet workpiece interactions are discussed. In the laser forming area, strain rate effects, and convex forming are presented.
متن کاملDevelopment of high-power laser coatings
Laser resistance and stress-free mirrors, windows, polarizers, and beam splitters up to 400 mm × 400 mm are required for the construction of the series SG facilities. In order to improve the coating quality, a program has been in place for the last ten years. For the small-aperture pick-off mirror, the laser-induced damage threshold (LIDT) is above 60 J/cm2 (1064 nm, 3 ns), and the reflected wa...
متن کاملUltrafast parallel laser processing of materials for high throughput manufacturing
Laser patterning is a key industrial process in the manufacturing of organic light emitting diode (OLED) displays, solid-state lighting foils and solar cells. Ultrafast lasers are of particular interest for this application as they may enable selective ablative removal of OLED layers with minimal energy density requirements on the target. Since sufficient laser output from commercial laser sour...
متن کاملDevelopment and application of new high-power laser beam sources
The actual market volume of high-power lasers for manufacturing is dominated by diffusion cooled CO2 laser systems at the multi-kW range and lamp pumped Nd:YAG laser systems at the kW range. Substituting the lamps by diodes the Nd:YAG laser in rod design entered the market as diode pumped solid state laser of the first generation. With output powers up to 6 kW the diode pumped rod is used in in...
متن کاملInvestigation of Thermal Dispersion and Thermally-Induced Birefringence on High-Power Double Clad Yb:Glass Fiber Laser
In this work the effects of heat generation on the modes of Yb:Glass double clad fiber laser were investigated. The thermal dispersion and thermally-induced birefringence were considered when the gain medium becomes an anisotropic medium. The results showed considerable modifications of laser modes profiles, in particular for transfer magnetic (TM) and transfer electric (TE) modes which their p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Review of Laser Engineering
سال: 2000
ISSN: 0387-0200,1349-6603
DOI: 10.2184/lsj.28.736