Research and Application of Anti-Collapse Lubricant Compound Polyalcohol for Water-Based Drilling Fluid
نویسندگان
چکیده
Polyalcohol is an environmentally friendly anti-collapse lubricant commonly used in water-based drilling fluids. It generally composed of the single polyether or polyol, but its lubricity and inhibition can’t satisfy application current fluid systems well. Consequently, laboratory has carried out research on compound polyalcohol. The samples are mixed with lauryl polyether, nonylphenol Tween 80 according to different proportions. cloud point, reduction rate lubrication coefficient linear expansion measured, change they caused should be observed. Then, optimal ratio optimized through orthogonal experiments. results show that increase content three kinds polyethers respectively enhances inhibition. When increases, point declines rises; when declines, it little effect coefficient; rises, first augments then basically remains unchanged. best mass polyether:TW-80:nonylphenol 6:3:4.
منابع مشابه
EXPERIMENT AND APPLICATION OF AN ANNULAR FOAM BREAKER FOR FOAM DRILLING FLUID (RESEARCH NOTE)
The annular foam breaker is one which uses the vacuum and shear force generated by the Coanda effect to break foam. Its effectiveness in destroying drilling foam has been test in wellbore flow simulation loop experimental stand. Experimental results showed that the operating pressure of the annular foam breaker should be larger than 0.6MPa and the stabilizers concentration of the foam drilling ...
متن کاملapplication of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولStudy on Rheological Property Control Method of “Three High” Water Based Drilling Fluid
The rheological regulation of the “three high” (high temperature, high density and high salinity) water-based drilling fluid is a worldwide problem due to the combined influence of temperature, solid content and salinity. This paper investigates the factors and regulation methods about rheological property of “three high” water based drilling fluid, and the effects of clay, salinity and weighti...
متن کاملApplication of Nano-Particles of Clay to Improve Drilling Fluid
Drilling fluids are an essential component of the rotary drilling process used to drill for oil and gas on land and offshore environments. The injection of this nano particle into drilling fluid increases the viscosity levels fluids. In these experiments, the rheological properties of the fluid including apparent viscosity (AV), plastic viscosity (PV), yielding point (YP), mud c...
متن کاملResearch on Processing of Drilling Fluid
Currently, the drilling fluid processing and recycling has gained more attention from various oilfields. Whether the waste drilling fluid’s processing and recycling is good or not will directly affect the development of oil industry. Therefore, the urgent affair is to develop and research the processing method of waste drilling fluid.This article describes various processing methods of waste dr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Open journal of Yangtze oil and gas
سال: 2022
ISSN: ['2473-1889', '2473-1900']
DOI: https://doi.org/10.4236/ojogas.2022.71001