Reproducibility of a titanium plasma vacuum spark discharge
نویسندگان
چکیده
منابع مشابه
Spark-plasma-sintering (SPS) of nanostructured titanium carbonitride powders
Spark-Plasma-Sintering (SPS) compaction experiments of nanostructured titanium carbonitride powders have been performed at 1600°C and 1800°C (sintering time = 1 min). The as-received nanostructured samples have been synthesized by rapid condensation from the gas-phase (high frequency plasma). The sintering results were compared with data obtained by various conventional sintering techniques suc...
متن کاملAerosol Generation by Spark Discharge*
An aerosol generator producing particles of any desired mobility, equivalent radius, and conducting material has been developed. Particles are formed by electrode atomization in a spark discharge. A high yield of charged particles enables generation of high concentration (> 10’ cmm3) monodisperse aerosols using electrostatic classification. In order to obtain nonagglomerated particles, the aero...
متن کاملSpark discharge coupled laser multicharged ion source.
A spark discharge is coupled to a laser multicharged ion source to enhance ion generation. The laser plasma triggers a spark discharge with electrodes located in front of the ablated target. For an aluminum target, the spark discharge results in significant enhancement in the generation of multicharged ions along with higher charge states than observed with the laser source alone. When a Nd:YAG...
متن کاملThe Miller volcanic spark discharge experiment.
Miller's 1950s experiments used, besides the apparatus known in textbooks, one that generated a hot water mist in the spark flask, simulating a water vapor-rich volcanic eruption. We found the original extracts of this experiment in Miller's material and reanalyzed them. The volcanic apparatus produced a wider variety of amino acids than the classic one. Release of reduced gases in volcanic eru...
متن کاملGrain growth kinetic of spark plasma sintered magnesia
In this research, the densification of magnesia nanopowder with a mean particle size of about 100 nm was investigated by spark plasma sintering undera pressures of 80 MPa and at temperature range from 1000 °C to 1400 °C and a heating rate of 50 °C/min for 20 minutes. The density of the samples slowly increased with increasing sintering temperatures to 1200 °C. Afterwards, with more increasing o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Plasma Science
سال: 2005
ISSN: 0093-3813
DOI: 10.1109/tps.2005.856513