Removal of Cu2+ from copper flotation waste leachant using sepiolite- full factorial design approach
نویسندگان
چکیده
منابع مشابه
recycling of chromite waste for concrete: full factorial design approach
recently full factorial design approach has been used to assess the recycling potential of a given waste. the objective of this study is to identify the significant factors and interactions involved in maximizing compressive strength of concrete when chromium waste is used as admixture. in this respect, experimental factors at two levels, which are admixture type (chromite/ chromite+ superplas...
متن کاملVitrification of copper flotation waste.
The vitrification of an hazardous iron-rich waste (W), arising from slag flotation of copper production, was studied. Two glasses, containing 30wt% W were melted for 30min at 1400 degrees C. The first batch, labeled WSZ, was obtained by mixing W, blast furnace slag (S) and zeolite tuff (Z), whereas the second, labeled WG, was prepared by mixing W, glass cullet (G), sand and limestone. The glass...
متن کاملBoron Removal by Electrocoagulation Using Full Factorial Design
Saline waters treatment has become increasingly important for drinking water supply in a greater part of the world. However, some serious limitations had recently been discovered during water treatment, among them the boron problem seems to have a critical meaning. According to the WHO regulations (2011), the boron concentration should be reduced to less than 2.4 mg/L for drinking water. The pu...
متن کاملKinetic Modeling and Photocatalytic Reactor Designed for Removal of Resorcinol in Water by Nano ZnFe2O4/Copper Slag as Catalyst: Using Full Factorial Design of Experiment
In this research new catalyst prepared by supporting ZnFe2O4 on Copper Slag (CS) and characterization of this catalyst was done by using Scanning Electron Microscopy (SEM) image, Energy-Dispersive X-ray (EDX) spectroscopy, BET surface area, and X-Ray Diffraction (XRD) patterns. UV + H2O2 processes by ZnFe2O4...
متن کاملRemoval of Copper Ions from Acid Mine Drainage Wastewater Using Ion Exchange Technique: Factorial Design Analysis
A factorial experimental design method was used to examine the “Cu” removal from acid mine drainage wastewater by ion exchange technique. Ion Exchange technique is preferred because of reduced sludge generation compared to conventional treatment techniques and better decontamination efficiency from highly diluted solutions. Factorial design of experiments is employed to study the effect of four...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Geodynamica et Geomaterialia
سال: 2013
ISSN: 1214-9705
DOI: 10.13168/agg.2013.0045