Removal of Basic Dyes from Aqueous Solution by Adsorption Using Rice Husk Ash-A Fixed Bed Column Study
نویسندگان
چکیده
منابع مشابه
Basic dyes removal from wastewater by adsorption on rice husk carbon
Rice husk carbon (RHC) has been prepared from rice husk impregnated with 50% H3P04 and carbonised at 300°C. Its adsorption capacity has been tested for the decolourization of wastewater containing safranine and methylene blue. The effect of system variables such as concentration, temperature, pH, contact time, adsorbent dosage and particle size are investigated. Removal of dye has been found to...
متن کاملRemoval of Bisphenol-A from Aqueous Solution Using Rice Husk Nanosilica: Adsorption Kinetics, Equilibrium and Thermodynamic Studies
This study evaluates the adsorption of bisphenol-A (BPA) from aqueous solutions using nanosilicaobtained from rice husk. Nanosilica (79 nm) was extracted from acid and thermal treated rice huskwaste. The rice husk nanosilica (RHS) was fully characterized through X-Ray DiffractionSpectroscopy (XRD), Scanning Electron Microscopy (SEM), X-Ray Fluorescence Spectroscopy(XRF) and Fourier Transmittanc...
متن کاملremoval of strontium (ii) from aqueous solution by adsorption using xerogel synthesized from teos: batch and fixed-bed study
0
متن کاملCarmine Adsorption from Aqueous Solution by Crosslinked Peanut Husk
To observe the feasibility of the removal of carmine, peanut husk, an agriculture by-product, was crosslinked with epichlorohydrin in alkaline medium and used for adsorption of carmine from aqueous solution. Batch experiments were carried out to study the effects of various parameters such as initial pH, contact time, adsorbent dosage and initial carmine concentration, as ...
متن کاملRemoval of Cationic Dyes from Aqueous Solution using Organomodified Nanoclay
In this work, organomodified nanoclay has been used as the adsorbent for the removal ofbasic blue 41, cationic dye from an aqueous solution. The performance of the organomodified nanoclay was tested in a batch system under varying pH (2–12), adsorbent dosage (0.1–2 g L-1), initial dye concentration (10–60 mgL-1), and contact time (5- 100 min). The best conditions were achieved at pH of 7,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Advanced engineering, Management and Science
سال: 2017
ISSN: 2454-1311
DOI: 10.24001/ijaems.3.4.7