Removal Characteristics of Toxic Gas on Activated Carbon Fiber Based Paper Filter
نویسندگان
چکیده
منابع مشابه
Effect of characteristics of activated carbon on removal of bromate
This study evaluates how the characteristics of activated carbon (AC) influence the adsorption–reduction of bromate (BrO3−) by performing inetic and isotherm tests. Experimental results reveal that both physical and chemical effects simultaneously affect the adsorption–reduction rocess. The wood-based carbons contained more mesopores than coconutand coal-based carbons, resulting in the adsorpti...
متن کاملStochastic reconstruction of carbon fiber paper gas diffusion layers of PEFCs: A comparative study
A 3D microstructure of the non-woven gas diffusion layers (GDLs) of polymer electrolyte fuel cells (PEFCs) is reconstructed using a stochastic method. For a commercial GDL, due to the planar orientation of the fibers in the GDL, 2D SEM image of the GDL surface is used to estimate the orientation of the carbon fibers in the domain. Two more microstructures with different fiber orientations are g...
متن کاملRemoval of volatile organic compound by activated carbon fiber
Experiments were carried out to study adsorption/desorption of volatile organic compound (VOC) on the activated carbon fiber (ACF) under dynamic conditions. The primary objective was to experimentally demonstrate the suitability of ACF in effectively adsorbing VOCs from inert gaseous stream under varying operating conditions, and compare its performance vis-à-vis that of the other commercially ...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملRapid prototyping of carbon-based chemiresistive gas sensors on paper.
Chemically functionalized carbon nanotubes (CNTs) are promising materials for sensing of gases and volatile organic compounds. However, the poor solubility of carbon nanotubes hinders their chemical functionalization and the subsequent integration of these materials into devices. This manuscript describes a solvent-free procedure for rapid prototyping of selective chemiresistors from CNTs and g...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Korean Society of Environmental Engineers
سال: 2020
ISSN: 1225-5025,2383-7810
DOI: 10.4491/ksee.2020.42.6.289