Removal and Recovery of Silver by Dynamic Adsorption on Bentonite Clay Using a Fixed-Bed Column System

Aqueous Cadmium Ions Removal by Adsorption on APTMS Grafted Mesoporous Silica MCM-41 in Batch and Fixed Bed Column Processes

Highly ordered mesoporous MCM-41silica with hexagonal structure was synthesized using extracted amorphous silica from sedge (Carex riparia) ash. Obtained mesoporous materials functionalized by 3-(Aminopropyl) trimethoxysilane (APTMS) and their structures characterized by means of X-ray diffraction (XRD), nitrogen adsorption-desorption, thermogravimetric analysis (TGA) and Fourier transform infr...

kinetic modeling of heavy metals adsorption on fixed bed column

the adsorption of lead (11) and copper (11) in a fixed bed column using activated carbonprepared from nipa palm nut was investigated. thomas model and yoon and nelson kinetic models were used to analyze the column performance. the rate constant for thomas model increased with increase in flow rate and initial ion concentration but remained constant at varying bed height. adsorption capacity for...

Equilibrium and Thermodynamic Studies of Cesium Adsorption on Bentonite Clay

Removal of cesium from synthetic aqueous solution through adsorption on bentonite, under batch equilibrium experimental condition at different values of pH and four temperatures (303, 313, 323, 333 K) was investigated. For this propose the suitability of the Freundlich adsorption model for equilibrium data were investigated. The parameters in the adopted adsorption isotherm models were determin...

Disinfection and removal performance for Escherichia coli and heavy metals by silver-modified zeolite in a fixed bed column

Fixed Bed Column Modeling of Cd(II) Adsorption on Bone Char Using Backward Bayesian Multiple Linear Regression

In this work, the backward Bayesian multiple linear regression (BBMLR) as a new approach is presented to predict the adsorption efficiency (AE) of Cd(II) ions by ostrich bone char (OBC) in the fixed bed adsorption with four operational variables consisting of pH (2-9), inlet Cd(II) concentration (Co= 25-100 mg/L), bed depth (h= 3-9 cm) and feed flow rate (Q= 0.5-30 mL/min). The performance of t...