Reliability centered prediction technique for diagnostic modeling and improvement

RELIABILITY CENTERED PREDICTION TECHNIQUE FOR DIAGNOSTIC MODELING AND IMPROVEMENT by

diagnostic and developmental potentials of dynamic assessment for writing skill

این پایان نامه بدنبال بررسی کاربرد ارزیابی مستمر در یک محیط یادگیری زبان دوم از طریق طرح چهار سوال تحقیق زیر بود: (1) درک توانایی های فراگیران زمانیکه که از طریق برآورد عملکرد مستقل آنها امکان پذیر نباشد اما در طول جلسات ارزیابی مستمر مشخص شوند; (2) امکان تقویت توانایی های فراگیران از طریق ارزیابی مستمر; (3) سودمندی ارزیابی مستمر در هدایت آموزش فردی به سمتی که به منطقه ی تقریبی رشد افراد حساس ا...

Support Vector Regression for Software Reliability Growth Modeling and Prediction

In this work, we propose to apply support vector regression (SVR) to build software reliability growth model (SRGM). SRGM is an important aspect in software reliability engineering. Software reliability is the probability that a given software will be functioning without failure during a specified period of time in a specified environment. In order to obtain the better performance of SRGM, prac...

Modeling of uncertainties in reliability centered maintenance - a probabilistic approach

Uncertainties in the decision making of reliability centered maintenance (RCM) are discussed. These uncertainties might be unacceptable in many practical applications, leading to non-optimum maintenance strategies. An alternative approach, opening for speci®ed uncertainties is shown to correct this defect. Exemplifying the approach, a simple ®re detection system is discussed. q 2001 Elsevier Sc...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...