Relationship between Porosity and Interface Fracture on Aluminum Foam Sandwich with Dense Steel Face Sheets Fabricated by Friction Stir Processing Route
نویسندگان
چکیده
منابع مشابه
Tensile Properties and Fracture Behavior of Aluminum Alloy Foam Fabricated from Die Castings without Using Blowing Agent by Friction Stir Processing Route
Al foam has been used in a wide range of applications owing to its light weight, high energy absorption and high sound insulation. One of the promising processes for fabricating Al foam involves the use of a foamable precursor. In this study, ADC12 Al foams with porosities of 67%-78% were fabricated from Al alloy die castings without using a blowing agent by the friction stir processing route. ...
متن کاملCharacterization of Aluminum-Based-Surface Matrix Composites with Iron and Iron Oxide Fabricated by Friction Stir Processing
Surface composite layers were successfully fabricated on an A 1050-H24 aluminum plate by dispersed iron (Fe) and magnetite (Fe₃O₄) particles through friction stir processing (FSP). Fe and Fe₃O₄ powders were packed into a groove of 3 mm in width and 1.5 mm in depth, cut on the aluminum plate, and covered with an aluminum sheet that was 2-mm thick. A friction stir processing (FSP) tool of square ...
متن کاملInvestigation on Mechanical Behavior Stir Soldering of Aluminum Foam Sandwich Panels
This paper introduces a novel soldering method for joining aluminum foams to aluminum plates. In this method, a rotating aluminum plate is soldered to the aluminum foam using zinc-based solder material. Rotation of the aluminum plate over the solder material drags the solder material and stirring it. Excellent tensile strength was obtained compared to those samples that are welded with the sold...
متن کاملInvestigation on Mechanical Behavior Stir Soldering of Aluminum Foam Sandwich Panels
This paper introduces a novel soldering method for joining aluminum foams to aluminum plates. In this method, a rotating aluminum plate is soldered to the aluminum foam using zinc-based solder material. Rotation of the aluminum plate over the solder material drags the solder material and stirring it. Excellent tensile strength was obtained compared to those samples that are welded with the sold...
متن کاملFriction Stir Processing of Aluminum Alloys: A Literature Survey
Many aluminum alloys with specific properties, like high strength, suffers from certain limitations in terms of cost and time of production, apart from the reduction in ductility. High strength accompanied by high ductility is possible with materials having fine and homogenous grain structures. Hence there arises a necessity to develop a processing technique that would produce a material with s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2012
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.maw201212