Relationship between Amount of Retained Austenite and Mechanical Properties in Martensitic Precipitation Hardening Stainless Steel
نویسندگان
چکیده
منابع مشابه
Mechanical Stabilisation of Retained Austenite in δ–TRIP Steel
Recent research suggests that extraordinary combinations of strength and ductility can be achieved in the so–called δ–TRIP steels, which contain ferrite, bainite and austenite. A part of the reason for the ductility of almost 40% elongation at a strength of some 900MPa, is believed to be the optimal stability of the austenite to plastic deformation. We demonstrate here that mechanical stabilisa...
متن کاملEvaluating Wear Properties of AISI 420 Martensitic Stainless Steel after Laser Transformation Hardening
As the turbine industries need to manufacture turbine blades made of martensitic stainless steel AISI 420 with high toughness and wear resistance, local laser hardening has become more and more important. In this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...
متن کاملMicrostructure, Mechanical and Corrosion Properties of Friction Stir Welding High Nitrogen Martensitic Stainless Steel 30Cr15Mo1N
High nitrogen martensitic stainless steel 30Cr15Mo1N plates were successfully welded by friction stir welding (FSW) at a tool rotation speed of 300 rpm with a welding speed of 100 mm/min, using W-Re tool. The sound joint with no significant nitrogen loss was successfully produced. Microstructure, mechanical and corrosion properties of an FSW joint were investigated. The results suggest that the...
متن کاملComparison of Mechanical Properties between Different Orthodontic Stainless Steel Archwires
Introduction: The Damon system recommended the use of revolutionary, hightechnology Damon edgewise 0.019” x 0.025” orthodontic stainless steel archwires (OSSA) for major mechanics and finishing and claimed that this new archwires offer greater efficiency during orthodontic treatment. No study has been carried out to compare this relatively new archwires to other popular OSSA already in the mark...
متن کاملInvestigation of microstructures and mechanical properties of dissimilar welds between Incoloy 825 and 316 stainless steel
In this study, microstructural features and mechanical properties of Incoloy 825-316L stainless steel dissimilar joints have been investigated. For this purpose, pulsed gas tungsten arc welding method was employed and 316L, Inconel 82 and Inconel 625 alloys were used as filler metal. First, specimens were cut. Pulsed gas tungsten arc welding was performed using peak and base currents of 220 A a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 2017
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane.tetsu-2017-034