Relating the maximum radial stress on pile shaft to pile base resistance

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A computational model of pile vertical vibration in saturated soil based on the radial disturbed zone of pile driving

In this study, a simplified computational model of pile vertical vibration was developed. The model was based on the inhomogeneous radial disturbed zone of soil in the vicinity of a pile disturbed by pile driving. The model contained two regions: the disturbed zone, which was located in the immediate vicinity of the pile, and the undisturbed region, external to the disturbed zone. In the model,...

متن کامل

Observed increases in offshore pile driving resistance

This paper presents 53 well-documented cases of the short-term set-up of open-ended steel pipe piles driven at two fields in the North Sea. Increases in soil resistance during driving (set-up) were observed when pile driving was re-started after delays typically ranging between 24 h and 100 h. The soil encountered at the sites consisted of overconsolidated sands and clays, where the clays varie...

متن کامل

Maximum Angle of Stability of a Wet Granular Pile

Anyone who has built a sandcastle recognizes that the addition of liquid to granular materials increases their stability. However, measurements of this increased stability often conflict with theory and with each other [1–7]. A friction-based Mohr-Coulomb model has been developed [3, 8]. However, it distinguishes between granular friction and inter-particle friction, and uses the former without...

متن کامل

Effect of Passive Pile on 3D Ground Deformation and on Active Pile Response

Using a series of model tests, this study investigated the effect of a passive pile on 3D ground deformation around a laterally loaded pile and on that laterally loaded pile's response in sand. The active pile head was subjected to lateral loads, and the passive pile was arranged in front of the active pile. In the model tests, the distance between the two pile centers was set to zero (i.e., a ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Géotechnique

سال: 2011

ISSN: 0016-8505,1751-7656

DOI: 10.1680/geot.10.t.006