REINFORCING METHOD FOR SHEARING FORCE AT THE JOINT OF STEEL-CONCRETE COMPOSITE BEAM WITH PRE-SHEARING STRESS
نویسندگان
چکیده
منابع مشابه
Evaluation of the Shearing Properties of Woven Fabrics: Rated Force
This paper introduces a very simple way to evaluate low stress shearing properties of woven fabrics with the advantages of simplicity and easy accessibility. A 200-gram load is applied on small portion of the sample instead of applying the load overall width of the fabric. As a result, buckling of the fabric will happen and the loading-unloading curve will show the behavior of the fabric during...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Chromatin Immunoprecipitation Assay Covaris truChIPTM Tissue Chromatin Shearing Kit with SDS Shearing Buffer and truChIP Low Cell Chromatin Shearing Kit with SDS Shearing Buffer
Chromatin shearing is the first critical step to provide sensitive and reproducible results in chromatin immunoprecipitation (ChIP) experiments. Adaptive Focused Acoustics (AFA) acoustic technology provides precise control over mechanical shearing and thermal control during processing to deliver high quality chromatin for the most sensitive results, in a highly reproducible manner. Optimizing t...
متن کاملSteel Plate Characteristic Effecting on Composite Coupled Beam at Concrete Shear Wall
Composite couple beams are the concrete elements consisting of longitudinal bars and steel plate, therefore suitable for shear transferring in couple shear walls with arranged gates in its height. In this paper, after modeling couple beams with and without steel plates with F.E methods and calibration the models with experimental results, effects of parameters such as thickness, height, length ...
متن کاملBond of High Strength Concrete with High Strength Reinforcing Steel
This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshu
سال: 1998
ISSN: 0289-7806,1882-7187
DOI: 10.2208/jscej.1998.592_63