منابع مشابه
Wash Fastness of Textile Fibers Dyed with Natural Dye from Eucalyptus Wood Steaming Waste
Natural dyes are gaining interest due their expected low risk to human health and to the environment. In this study, the wash fastness of a natural coloring matter from the liquid waste produced in the steam treatment of eucalyptus wood in textile fabrics was investigated. Specifically, eucalyptus wood extract was used to dye cotton, nylon and wool in an exhaust dyeing process without the addit...
متن کاملComparison of dyeing of polyester fibers with natural dye and bio-mordant
In this study, dyeing of two regenerated polyester fibers, poly-trimethylene terephthalate (PTT) and poly-lactic acid (PLA), with natural dyes were compared with that of poly-ethylene terephthalate (PET) fiber. Lac was used as the primary natural colorant while Catechu was chosen as a natural color that can also act as a biomordant. The effects of temperature, initial pH of dye bath and dyeing ...
متن کاملHigh-density Polyethylene-based Composites with Pressure-treated Wood Fibers
High-Density Polyethylene (HDPE)-based composites with alkaline copper quaternary (ACQ)and micronized copper quaternary (MCQ)treated wood fibers were manufactured through injection molding. The mechanical properties, water absorption, and biological resistance properties of the fabricated composites with different coupling treatments were investigated. Composites with ACQand MCQ-treated wood ha...
متن کاملMultiwall Carbon Nanotube Reinforcement of Polyacrylonitrile Fibers
Aligning multiwall carbon nanotubes (MWNTs) with the direction of load is desirable for maximizing tensile reinforcement in composites. This has been accomplished by spinning composite fibers containing MWNTs[1]. The shear and elongational flow fields inherent to fiber processing cause the MWNTs to align with the fiber axis. Efficient stress transfer from the matrix to the MWNTs is also a cruci...
متن کاملCellulose fibers and nanofibrils for adhesive reinforcement
Introduction In wood industry, adhesive bonding is one of the key process steps. To ensure continuing technological progress in wood industry it is necessary to explore new possibilities of improvement in adhesive bonding. The potential routes for performance improvements suggested by a state of the art report issued by COST Action E13 Wood Adhesion and Glued Products (Dunky et al. 2002) focus ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part B: Engineering
سال: 2013
ISSN: 1359-8368
DOI: 10.1016/j.compositesb.2013.04.039