Reinforcement of RC structure by carbon fibers
نویسندگان
چکیده
منابع مشابه
Multiwall Carbon Nanotube Reinforcement of Polyacrylonitrile Fibers
Aligning multiwall carbon nanotubes (MWNTs) with the direction of load is desirable for maximizing tensile reinforcement in composites. This has been accomplished by spinning composite fibers containing MWNTs[1]. The shear and elongational flow fields inherent to fiber processing cause the MWNTs to align with the fiber axis. Efficient stress transfer from the matrix to the MWNTs is also a cruci...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملTHE STUDY OF ELECTROLESS COATING OF NICKEL ON CARBON FIBERS
The continuity and thickness of the coating layer, are the most important factors in wetting properties and strength of carbon fibers. These factors are crucial in the quality of metal matrix composites made with carbon fibers. In this research the Polyacrylonitrail base carbon fibers have been nickel coated with 0.2, 0.5, 0.8 and 11 ,u in thickness, by the electroless method. The effect of the...
متن کاملFinite Element Analysis of Square RC Columns Confined by Different Configurations of Transverse Reinforcement
Received: November 11, 2016 Revised: January 26, 2017 Accepted: February 10, 2017 Abstract: Introduction: Square reinforced concrete (RC) columns with the confinement effect of transverse reinforcement perform well in ductility and have been used widely in RC structures. Its behavior is the classic topic of anti-seismic and anti-collapse analysis of RC structures. With the advancement of the fi...
متن کاملRecovering Carbon Fibers
S ince 2000, the worldwide market for carbon-fiber-reinforced composite materials (CFRP) has grown from 30,500 to 43,500 tons per year. According to the latest estimates, the demand for carbon fibers will rise to some 1,300,000 tons by 2020 [1]. When preforms are used for manufacturing CFRP parts by the Liquid Composite Molding (LCM) process, up to 40 % waste accrues, resulting in a considerabl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2016
ISSN: 2261-236X
DOI: 10.1051/matecconf/20168309009