Reinforcement Effects of Soil mixed with Fibers
نویسندگان
چکیده
منابع مشابه
Mixed Mode Fracture in Reinforced Concrete with Low Volume Fraction of Steel Fibers
An investigation into the mixed mode fracture of steel fiber reinforced concrete (SFRC)beams with one percent volume fraction of steel fiber is presented. A series of notched beams withdifferent notch depths and locations are tested under three-point bending. The test results for apparentfracture toughness, crack trajectories, and fracture energy are presented. The crack paths for SFRCand plain...
متن کاملEffect of Adding Nanoclay on the Mechanical Behaviour of Fine-grained Soil Reinforced with Polypropylene Fibers
In this study the performance of clay nano-particles on the soil reinforced with Polypropylene fibers (PP-fiber) has been investigated. Also a series of investigations concerning the effect of random orientation of fibers on the engineering behaviour of soil were conducted. Soil mixtures were modified with varying percentages of nanoclay and Fibers. Unconfined compressive strength (UCS), Compac...
متن کاملSoil Reinforcement and Geosynthetics
In the context of sustainable development which is a balancing act between the fulfilment of human needs and the protection of the natural environment, the use of natural fibers such as coir in geotechnical applications is desirable. Reinforcing the soil with coir fibers/coir geotextiles is a cost effective solution to the ground/soil improvement problems. The effects of fiber parameters on the...
متن کاملMultiwall Carbon Nanotube Reinforcement of Polyacrylonitrile Fibers
Aligning multiwall carbon nanotubes (MWNTs) with the direction of load is desirable for maximizing tensile reinforcement in composites. This has been accomplished by spinning composite fibers containing MWNTs[1]. The shear and elongational flow fields inherent to fiber processing cause the MWNTs to align with the fiber axis. Efficient stress transfer from the matrix to the MWNTs is also a cruci...
متن کاملCellulose fibers and nanofibrils for adhesive reinforcement
Introduction In wood industry, adhesive bonding is one of the key process steps. To ensure continuing technological progress in wood industry it is necessary to explore new possibilities of improvement in adhesive bonding. The potential routes for performance improvements suggested by a state of the art report issued by COST Action E13 Wood Adhesion and Glued Products (Dunky et al. 2002) focus ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of geosynthetics symposium
سال: 1996
ISSN: 1344-3496,1884-3719
DOI: 10.5030/jcigsjournal1995.11.37