Reinforced Composites by Palmyra Palm Leaf Stalk fiber: A Basic Review on Parameters, Method, and Performance
نویسندگان
چکیده
Trends in Textile Engineering & Fashion Technology Reinforced Composites by Palmyra Palm Leaf Stalk fiber: A Basic Review on Parameters, Method, and Performance Md. Touhidul Islam* Department of Engineering, Mawlana Bhashani Science University, Bangladesh *Corresponding author:Md. Islam, Tangail-1902; Dhaka, Submission: July 24, 2023; Published: September 06, 2023 DOI: 10.31031/TTEFT.2023.09.000708 ISSN 2578-0271 Volume9 Issue2
منابع مشابه
Analysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE)
Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...
متن کاملthe impact resistance of fiber-reinforced polymer composites: a review
fiber reinforced composites are widely used instead of traditional materials in various technological applications. therefore, by considering the extensive applications of these materials, a proper knowledge of their impact behavior (from low- to high-velocity) as well as their static behavior is necessary. in order to study the effects of strain rates on the behavior of these materials, specia...
متن کاملOil-Palm-Fibre Reinforced Phenolformaldehyde Composites
Thermophysical properties such as, effective thermal conductivity (A,,) and effective thermal diffusivity (Xc) of untreated reinforced phenol formaldehyde with different weight per centages of oil-palmfibre (x) are measured simultaneously using the transient plane source (TPS) technique between 80 to 120"C. The composites investigated contain 20, 30 and 50 weight per centage of oil-palm-fibre. ...
متن کاملCarbon Fiber Reinforced Bismaleimide Composites
Bismaleimide (BMI) resins are developed very rapidly due to the demands of the defense and aerospace industries. They are cross-linked polymers which process like epoxy resins but have an upper use temperature of 230°C, compared to the epoxy upper use temperature of 175°C. Also due to the available intrinsic properties of BMI resins such as higher thermal stability and lower toxicity than those...
متن کاملCreep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Trends in textile engineering & fashion technology
سال: 2023
ISSN: ['2578-0271']
DOI: https://doi.org/10.31031/tteft.2023.09.000708