Refused derived fuel pellets from municipal solid waste and rice husk

Evaluating of Refuse Derived Fuel (RDF) Production from Municipal Solid Waste (Case Study: Qazvin Province)

Considering increasing population growth in recent decades, and consequently, the increase in waste production in the world, waste management and efforts to reduce their harm to the environment has become an important issue. One of the appropriate ways to manage municipal waste is to generate energy from waste, especially by RDF production method. On the other hand, in order to reduce the consu...

Hydrothermal Treatment of Municipal Solid Waste to Produce Solid Fuel

This paper describes the application of innovative hydrothermal technology on local municipal solid waste (MSW) to produce low chlorine content solid co-firing fuel with coal. Raw MSW was treated at temperatures ranging from 210 to 235°C with 30 to 90 minutes holding period. The process yielded slump products which were then naturally dried to 5% moisture content, resulted in dry products with ...

Thermogravimetric and kinetic analysis of the decomposition of Solid Recovered Fuel from municipal solid waste

The assessment of reuse potential for municipal solid waste and refuse-derived fuel incineration ashes

Resource recovery plants with a waste presorting process prior to incineration have not been successfully implemented in many developing countries. At least two engineering projects were fully assessed in Taiwan for the possible installation of presorting facilities in order to increase the potential efficiency of material and energy recovery for municipal incinerators. But the reuse potential ...

Elemental balance of SRF production process: solid recovered fuel produced from municipal solid waste.

In the production of solid recovered fuel (SRF), certain waste components have excessive influence on the quality of product. The proportion of rubber, plastic (hard) and certain textiles was found to be critical as to the elemental quality of SRF. The mass flow of rubber, plastic (hard) and textiles (to certain extent, especially synthetic textile) components from input waste stream into the o...