منابع مشابه
Three-dimensional diffractive micro- and nano-optical elements fabricated by electron-beam lithography
The broad development of the microand nano-technologies in the past few years increased the need of techniques capable of fabricating sub-micron structures with arbitrary surface profiles. Out of the several fabrication approaches (HEBS lithography, laser writing, etc.) the electron beam writing stands out as the one capable of the highest resolution, superior alignment accuracy and very small ...
متن کاملLow-cost Polymer Fresnel Microlens Array Fabricated by Maskless Lithography
This work presents the fabrication of 8X8 PDMS Fresnel microlens array (MLA) by maskless lithographic system. The FWHM intensity values of each spot present a deviation of 8%. Such a MLA can be applied as Shack-Hartmann wavefront sensor and to enhance the efficiency of detector arrays. OCIS codes: (080.2208) Fabrication, tolerancing; (080.4298) Nonimaging optics
متن کاملSensing Performance of Precisely Ordered TiO2 Nanowire Gas Sensors Fabricated by Electron-Beam Lithography
In this study, electron beam lithography, rather than the most popular method, chemical synthesis, is used to construct periodical TiO(2) nanowires for a gas sensor with both robust and rapid performance. The effects of temperature on the sensing response and reaction time are analyzed at various operation temperatures ranging from 200 to 350 °C. At the optimized temperature of 300 °C, the pro...
متن کاملMicro gas bearings fabricated by deep X-ray lithography
Micro bearing systems for Micro Electromechanical Systems (MEMS) have drawn attention for several decades as critical components for micro rotating machinery. Ideally, frictionless bearings are needed, and in practice, micro gas bearings approach the ideal. Typically, bearings function as a separate component, assembled onto sliding counterparts. However, in micro scale devices, assembly proced...
متن کاملDesigning the optimal Fresnel lenses by using Zemax software
In this paper, the optimal Fresnel lenses are designed by Zemax software.The fundamental problem of the Fresnel lenses is the beam divergence, which wasresolved by decreeing the output stain diameter on the image plane. For this purpose,two types of radial and cylindrical Fresnel lenses are simulated with different groovesusing Global and Hammer optimization methods. The minimum output stain di...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Review of Laser Engineering
سال: 1990
ISSN: 0387-0200,1349-6603
DOI: 10.2184/lsj.18.9_741