Refinement and Localization of Primary Intermetallic Compound in Hyperperitectic Al–Cr Alloy by Centrifugal Duplex Casting
نویسندگان
چکیده
منابع مشابه
Optimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology
Centrifugal casting is one of the advanced casting branches widely used in the metallurgical industry in which the centrifugal force helps strengthen the workpiece material. The present work attempt to study the effect of the horizontal and vertical centrifugal casting parameters included the centrifugal mold rotation speeds and G-factors values on the quality of the product. The work has been ...
متن کاملSupercooled Simultaneous Composite Casting for Microstructure Refinement of Alloy
The objective of this work was to introduce a novel method for refining the solidification microstructure. Traditional casting usually solidifies one homogeneous liquid by removing heat from liquid surface, by which the microstructure solely depends on the heat removal rate for the given alloy composition. The newly developed multi-liquid composite simultaneous casting concept raises an alterna...
متن کاملAlNb intermetallic alloy
This investigation was conducted to ascertain the benefits of electropolishing after mechanical polishing for electron backscattered diffraction of a Ti 2 AlNb intermetallic Ti − 21Al − 29Nb (at.%) alloy containing the orthorhombic (O) and body-centered-cubic (BCC) phases. Electropolishing was performed at − 40 ° C in 6% H 2 SO 4 methanol solution. Atomic force microscopy was used to measure th...
متن کاملIncreasing strength and conductivity of Cu alloy through abnormal plastic deformation of an intermetallic compound
The precipitation strengthening of Cu alloys inevitably accompanies lowering of their electric conductivity and ductility. We produced bulk Cu alloys arrayed with nanofibers of stiff intermetallic compound through a precipitation mechanism using conventional casting and heat treatment processes. We then successfully elongated these arrays of nanofibers in the bulk Cu alloys to 400% of original ...
متن کاملANALYTICAL DATA FOR NiO REDUCTION AND Al3Ni2 INTERMETALLIC COMPOUND FORMATION
In this research, the nickel oxide was dissolved in cryolite at temperatures of 880, 940 and 1000°C. In order to reduce the nickel oxide, aluminum was added to the salt. Simultaneously the nickel oxide was reduced and Al3Ni2 intermetallic compound was formed. In the duration intervals of 2.5-40 minutes samples of the salt and metallic phases were taken. The variation of the nickel content in me...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Transactions, JIM
سال: 1997
ISSN: 0916-1821,2432-471X
DOI: 10.2320/matertrans1989.38.879